@SoniX
The UBU tool is amazing and I cant wait for the next release! Is there any chance of adding support for other platforms of bios? Insyde or Phoenix/Award for example? Possibly a separate tool for each platform?
>Here<. It is SoniX’s MEGA account. You can find the link within the start page of >this< thread as well.
@twindragon6 : Ask SoniX.
All I can say is, that
a) SoniX has freshly uploaded the drvver.exe file on 11/09/2021 and
b) the hex code of this file is completely different from the drvver.exe, which is within the original UBU tool v1.79.17.
Hi all it’s been awhile,
Has anyone here used the ubu tool on a gigabyte z390 board?
@trebleta
Since there was not reason to start a new thread regarding your question, I have moved your post into this already existing 100% matching thread.
@Fernando , thanks boss. Hope you are good and well. Also thank you for your past help.
So as i said above, has anyone used this great tool on a Gigabyte Z390 Master motherboard. I have used ubu tool to read bios info, but after i messed my marvell controller on another board before ubu was around, im after all the advice I can get, Hoping someone has used and could point out anything I should know?
But the ubu is a god send
@trebleta :
I am pretty sure, that the UBU tool works with the BIOS of a Gigabyte Z390 Master, but I doubt, that you will get this way an answer to your question.
My advice: Enter “Gigabyte Z390 Master” (without quotation marks) into the Forum’s “Search” box. You will get a lot of hints!
@trebleta :
On overclock.net I use the tool to mod Gigabyte Z390 BIOS’s for peeps in the Gigabyte Z390 thread.
It’s a little tricky though, you need to manually download the RST firmware and for the GOP firmware you need to use the proper VBT file that someone provided for me in a thread here or onboard video does not work.
I provide all the BIOS’s modded for peeps there though, find the overclock.net Gigabyte Z390 thread.
Edit: I also use the best performing fastest microcodes when I mod the BIOS’s.
Edit by Fernando: Fully quoted post replaced by directly addressing (to save space)
@kedarwolf Hi ya mate, it’s me from oc.
yes your modified bios is grand and you have done a really splendid job just thinking you dont have a z390 now so was going to help out, thinking ahead.
When I get time will look at your past posts too.
Where will this thread be moving to when this forum shuts down?
Dear @SoniX as this forum is going to be closed, are you going to continue with the UBU tool proyect in another website? Thanks
MCE DB r210 released, a new build time actually before closing the forum.
After 1.79.12.1 UBU can’t find
"Intel Gbit GUID 4953F720-006D-41F5-990D-0AC7742ABB60"
“New pattern for searching for EFI Intel LAN” not so good?
only copy this in UBU folder
i using this way ,.and all works fine 
for microcodes - correct folder + GenUSRmC.bat
[[File:Bez názvu.png|none|auto]]
example UBU_v1.79.17 + MCE 210
good luck
Hello, I have a B550 AORUS PRO V2 motherboard, do anyone knows if it is possible to mod the bios with ubu?
I ask because if I try to update the disk controller efi and OROM I get those messages:
AMD RAIDXpert2 GUID C74F06D2-ED92-489B-879C-C0E428A22167
parseSection: GUID defined section with unknown processing method
parseSection: GUID defined section can not be processed
parseSection: GUID defined section with unknown processing method
parseSection: GUID defined section can not be processed
No replacements can be applied to input file
Are the b550 gigabyte bios locked?
Thanks
@Nemo1985 :
Modded BIOS file (latest).
Updated items:
EFI AMD RAIDXpert2-Fxx - 9.3.1-00029
OROM AMD RAIDXpert2-Fxx - 8.1.0-00064
EFI AMD GOP Driver - 2.18.0.17.10
OROM VBIOS Cezanne - 017.010.000.030.000000
OROM VBIOS Renoir - 017.010.000.030.000000
EFI Realtek UNDI Driver - 2.057
00800F12│0800126C│2020-06-19
00810F11│08101103│2019-04-17
00A20F12│0A201205│2021-07-19
Everything else is the latest.
Edit by Fernando: Fully quoted post replaced by directly addressing (to save space)