Intel UHD Graphics 630 Video Driver for Win7 x64

Yaron · December 16, 2020, 4:38pm

"Windows has disabled this device due to reported problems (code 043)".

Thanks.

DeathBringer · December 16, 2020, 4:39pm

I need screenshot.

Yaron · December 16, 2020, 4:40pm

The screenshot.

DeathBringer · December 16, 2020, 4:58pm

Show a second tab - Driver.

Yaron · December 16, 2020, 5:03pm

Please let me know if you need anything translated.

DeathBringer · December 16, 2020, 5:07pm

OK. Show properties of igdkmd64.sys in \Windows\System32\drivers\

Yaron · December 16, 2020, 5:16pm

DeathBringer · December 16, 2020, 5:19pm

Bad news. My old mod was installed correctly but it doesn’t support UHD 630 with DEV_9BC5

Yaron · December 16, 2020, 5:21pm

OK. I appreciate your help.

Should I try one of the following?

https://www.sevenforums.com/drivers/4208…tml#post3444705
https://www.youtube.com/watch?v=cWf8CmECRA8

DeathBringer · December 16, 2020, 5:24pm

No, these are useful for Kaby Lake (HD 630), not UHD 630.

Yaron · December 16, 2020, 5:25pm

Thanks again. I appreciate your kind help.

Yaron · January 1, 2021, 9:26pm

@DeathBringer ,

A $50 USA "appreciation" if you can make the driver work on my machine.

Happy New Year.

DeathBringer · January 2, 2021, 8:31pm

@Yaron
I haven’t suitable certificate to make mods for using without test mode.

Yaron · January 2, 2021, 9:50pm

@DeathBringer ,

I’m not sure I understand it.
Do you mean you can possibly make it work but only in test mode?

Thank you.

DeathBringer · January 2, 2021, 9:53pm

Yes.

Yaron · January 2, 2021, 9:56pm

As much as I want it, test mode would be highly inconvenient.

Thanks again. I do appreciate it.

DeathBringer · January 3, 2021, 6:33pm

First results with test mode.
But with random BSOD 0x50 on booting with ntoskrnl.exe
If it boots then it runs stable till reboot.

Win8.1.jpg

Yaron · January 3, 2021, 7:14pm

Any chance it might work in normal mode?

Thank you.

DeathBringer · January 3, 2021, 7:28pm

There is a chance, but research takes time and I have little free time.
So far, no one has hired me to do this research. And you are ready to pay only for the result.

BTW: canonkong gave me Driver-Signer, but test mode is required to install modified drivers in Win8.1. It can be disabled after installation

Yaron · January 3, 2021, 7:43pm

I certainly understand you and appreciate your effort. But I hope you understand me too: unfortunately I can not pay for a "research" without a result.

Just to make sure: when you first wrote it should only work in test-mode - did you mean the installation only or every reboot?