Nuc5i3ryk bios is modified

BIOS/UEFI Modding BIOS Modding Requests
1

Hi to All,
I have a Problem with the bios from nuc5i3ryb Board. The System information Window is clean, only the uuid is showing.
Chassis Information is blank. And in Other information contains “integrator toolkit has modified this bios” .
How can i reset it?

Thanks in advance

Best Regards Muki

2

NUCs normally have their machine specific data in NVRAM, dump the complete firmware or the bios region with intel ME tools (version corresponding to Intel CSME) from here, section C2. (CS)ME System Tools and check NVRAM for entries before AmiStandardDefaultVariable folder

Should look like this, DmiData and UUID. MfgMode and Guid1394 might be FF (pic from NUC7 or NUC8)

image
image814×299 5.43 KB

I never used the integrator toolkit, maybe it’s possible to enter the values with it, too.

3

First, thank you very much for your help and Quick answer!
All of this is New for me, i must do it slowly. I Have no knowledge about this tolls and how to Use it.

Best regards
Muki

4

Hi,
I cant make a dump. ME is Read and write Protected.
What to Do next?
Thanks

5

Try to dump the bios region only.

6

Where can i find a tut step by step how to Do this?