A GA-AB350 Gaming 3 F23 BIOS mod will be really appreciated.
Congrats for the hard work, ket!
Just had something really weird happen on my x470 gaming7 wifi board @ket
Six beeps through my bose pc speakers (about 300Hz) then a short freeze, but now everythings working normal again, what the hell lol
Whats going on lol, can the uefi in some way beep through your stereo pc speakers?
X370 Gaming 5 modified F23 firmware is now live
Not without going to considerable effort no.
wait for the K7 so. 
thanks
@ket , will have any possibility to release a mod of F23 BIOS for AB350 Gaming 3? Iāll really appreciate that one.
And have a possibily to make a donation for you?
Modded Gaming K7 firmware is now live, also updated Gaming 5 modded firmware to fix a few minor UI things. Let me know if any options are missing under Fast Boot as Iāve changed things a little there.
Iāll look in to getting a paypal donate button set up and go from there, depending on the firmware release it can take up to 3 hours to do a "full" modified version with naming schemes that fit the UI, proper item descriptions, apply workarounds, expose options and apply possible performance tweaks, etc, which is certainly more time than I signed on for I just keep doing it because GB wonāt.
good idea ! 
thanks ! will test this when Iāve got time to do.
Please, if you can take a look iāll be really grateful. The option iām aiming is Windows 10 Features. That board (AB-350 Gaming 3) dont allow you to change this option since F5 (that version dont support my memory profiles, wich is supported since F20). I tried to reach Gigabyte to see if they will fix that, but everyone here knows how they works (and here in Brazil they took at least 2 weeks to reply in eSupport).
just install your F23 mod bios.
all seems allright !
find CLDO_VDDP !!! 
andā¦bug with RTC (bad values in CAD Strengh) is gone !
look
20 in bios, and 20 in RTC
remenber, with your F23f, i had 20 in bios, but 120 in RTC
great ! great !
THANK YYYYYOOOOOOOUUUUUUUUUU !!!
and my ram boot @more than 3266
all seems perfect so
Gigabyte : 0 ; Ket : 1
have a good day.
@ket I had the same issues with Ryzen Timing Checker not detecting some values or incorrect onesā¦ I disabled "Safe Boot" in the Firmware BIOS Options and that did the trick!!! RTC now detects and shows all the correct values!!!
[[File:Screenshot (333).png|none|fullsize]]
what this "safe boot" is for ?
thanks
Do you refer to Fast Boot?? I was looking for this option but donĀ“t find it.
This is my mem model of Corsair
And the setting
Any tip to optimize should by nice because using the memory RYZEN DRAM Calculator doesnĀ“t work for me.
@germanps
I apologise for the confusion, I hadnāt noticed my terminology errorā¦ Iām referring to "SECURE BOOT" thatās what fixed the exact same issue with RTC in my caseā¦ Also one other thingā¦ Did you follow the README.TXT??? The reference to check mark the Run as Administrator option box from the Properties window by right clicking the RTC.EXEā¦
Gaming K5 modded firmware is now live
Hi @Ket when trying to flash this new bios mod (k5) i keep getting Bios ID Mismatch , both on DOS and Q-Flash, any idea why? thank you for the hard work
Only scenarios that will happen is if;
1. The board somehow had the wrong firmware flashed to it
2. BIOS tag mismatch
3. If I forgot to disable the check (which only affects Q-Flash flashing, DOS flashing still works)
Why you are getting that error is a bit of a mystery. If you havenāt already shut the system down, set the dip switches up on your board so only one ROM chip is active then try flashing again.
Will try it again when home and report back
Hello again. The error on Q-flash is " Bios ID check Error. On dos is !!!Bios Id Mismatch!!! Never got this problem with your bios
Sorry for the brain damage. The fix was using the jumper to clear CMOS. Installed successfully through DOS. THANK YOU
No prob, all is well that ends well 
Let me know if anything under Fast Boot is missing or if you notice anything being incorrectly labeled I used a few "cheats" that shouldnāt affect anything but canāt say fpr 100% as I donāt have a K5 to test with.