Yeah sure you can if you have the time.
I’ll be waiting
@slugger - quick single setting test needed before I do them all. Please test these BIOS, in the following order, stop testing (no further BIOS needs tested) once “Enhanced Turbo” setting is visible in OC section and let me know which BIOS showed the setting
1. SetO
2. AMITO
3. SetAMITB
Rename each file to stock name.extension (E7A69IMS.A60) before putting on USB to M-Flash, do this one at a time so you don’t get files mixed up, that way you can keep track of which works first to let me know.
If, during any test, you cannot enter the OC section, it’s OK/expected at some edit method fails, reboot and then go right to M-Flash and reflash stock BIOS or move onto next test BIOS.
This is point of this test, to see which of three methods is required for this BIOS, to make hidden setting visible.
Also, I meant to ask before and forgot, please confirm, in “Settings” section, can you see Access Level anywhere?
I assumed Admin/Super in above edit, if all fail, may need to test User instead, especially if you cannot see Access Level to give me actual current value
http://s000.tinyupload.com/index.php?fil…458031338015292
Ok so I went ahead and dowloaded all 3 and lined them up like you said. Flashed the first one (SetO), and it worked!
Now I can see the “Enhanced Turbo” setting. So I didn’t try the other two.
And also I checked my settings menu and and couldn’t encounter Access Level, or anything that sounds similar to that. But I guess it doesn’t really matter at this stage.
Great, stop there, thank you for the info, now I will make the rest of the settings visible.
Yes, no need to worry about Access Level for right now, we may need to try Admin/Super or User later, if some other setting doesn’t become visible by setup edit like the Enhanced Turbo did, but we’ll cross that bridge later if we run into it.
Please wait, I will try to get the rest done for you tonight, if not I will by tomorrow for sure.
* Edit - @slugger - here is mod BIOS with all the rest of what I mentioned hidden on page one, now revealed.
OC Genie, Enhanced Turbo, Base Clock and Base Clock mode, CPU Core/GT Voltage Mode, CPU Core Voltage, CPU Core Voltage Offset Mode, CPU Core Voltage Offset (+Same 3 for GT voltage), CPU PLL SFR Voltage, OC Retry Count, OC Quick View Timer
Also, I updated all CPU microcodes in previous mod I sent, that is now carried over as well.
http://s000.tinyupload.com/index.php?fil…160796205763132
First off all, Thank you so much for taking your time and doing it for me.
The settings you made made visible works perfectly fine, I just have one more question.
Is the situation that’s happening to me in the video I attached (CPU Core ratio not getting more than 45). Is that something that MSI artificially locked via software (meaning that it is moddable) OR is that something with the B250 chipset that is not changable/unlockable?
Thank you again for all your hard work!
CPU.zip (5.69 MB)
@slugger - You’re welcome! 
I think it’s due to B250 chipset, this is not meant to even have any options I made available to you.
Can you increase it over that with XTU in windows? If yes, then maybe some BIOS setting/combo is needed
No, XTU doesn’t allow me to increase it.
Then it’s chipset locked 
If you can find someone using B250 with higher multi let me know, I will check out it’s BIOS options and see if I can spot anything.
Well that’s okay, You have already helped me more than enough 
Let me know if you find anything.
I hate to revive an old topic but the links for the bios mods are dead. Is there anyway to get them reuploaded? Thank you in advance.