Title: Samsung Galaxy Book NT750XGR (NB6099C / TITAN4) - no POST, BIOS dump looks structurally OK, need review Hi, I have a Samsung Galaxy Book NT750XGR (NP750XGR) that does not POST. I dumped the SPI flash and would like someone to check whether the image is healthy, and if possible, help me reflash a clean image. Board: NB6099C_PCB_MB_MP1.0, MODEL: TITAN4, REV MP1.0_23/12/01 BIOS chip: Winbond 25R128JVSN (date code 2418), read as W25Q128JV, 16 MB Symptoms: - Press power: keyboard backlight flashes once and turns off - Charging LED blinks blue - Fan spins up as the CPU gets warm, so the board partly powers up - No display on the internal screen or on external HDMI - No short found on the power rails (measured inductors to ground) - Battery disconnect and power reset did not help What I did: - Read the chip in-circuit with a CH341A (modified to 3.3V) and a SOIC8 clip - Read it several times; the repeated reads gave identical results (CRC32 0x992D8C8B) - Opened the dump in UEFITool NE: - Descriptor region OK (5A A5 F0 0F signature at 0x10) - ME region parsed, version 16.1.30.2342, size 0x41E000 - BIOS region: 12+ FFSv2 volumes parse without problems - Only two messages: “parseSection: PE32 image with invalid DOS signature” and “parseFile: non-empty pad-file contents will be destroyed after volume modifications” Questions: 1. Does the image look healthy to you, in particular the ME region and NVRAM/variable store? 2. Could a stale ME or memory-training data (NVRAM) cause a no-POST like this? 3. If it makes sense, could someone help me build a clean image that keeps my board-specific data, or tell me how to do it? The dump contains my serial number and device data, so I do not want to post it publicly. I can send it by private message or a private download link. Thanks a lot for any help.
Edit by Fernando: Thread moved into the “BIOS Problems” Category and title customized/shortened