[Problem] Valleyview Tablet not working after RAM Upgrade

I have a tablet with a z3735f processor and 1GB of DDR3L RAM. I updated it to 2GB, but the tablet won’t boot with the original firmware. I transferred the firmware from another tablet with 2GB of RAM, but with the original IntelGOPVbt partitions. The tablet booted and works, but not all devices can access the driver, as the I2C address is set to a different value.
Question: Which partitions in the original firmware can I replace to make the tablet work? I don’t want to use a completely different firmware.
I’ve had some success: I was able to replace one Pei module, and the tablet starts booting, but only with a black screen and the backlight on.

Edit by Fernando: Thread moved into the “BIOS Modding Problems” Category and title customized

@ARHIVATOR
Welcome to the Win-Raid Forum!
If you want help, you should
a) tell us the manufacturer and the model name of your tablet and
b) give us a link to the original and the currently in-use BIOS.