Hello,
First time poster and failed modder coming out of lurking because I can’t seem to get my bios mod to work. I’ve tried a number of things and followed a few videos, but it does appear as if I’m in over my head. Here are some of my bullet points.
- Original Hardware
- Lenovo ThinkCentre M910q
- CPU: i5-6500T
- RAM: 16GB
- DISK: 256GB NVME
- All tested and working before/after my mod attempts
- Used a CH341A programmer to read/extract/save my original bios
- Used CoffeeTime 0.99 to modify my BIOS
- Ran all patches
- Microcodes Used: 906EA, EB, EC, ED, E9, and 506E3
- ME: tried consumer and corporate, always selected disabled
- Used latest VBIOS + GOP
- Read I didn’t require a Pin Mod (don’t know if that’s true at this point)
- Succeeded in pushing a modded BIOS and tested with following CPUs
- i5-6500T (good)
- i7-7700T (good)
- i5-9600 (black screen) (Tested with both a 65W & 90W power adapter)
- Repeated tests with and without draining my CMOS battery
To be upfront, I didn’t update to the latest BIOS since the videos I was watching were posted in 2022 and my original BIOS was a 2023 version. I figured I was fine, but if I’m overlooking something here, I’d appreciate any help.
My very first attempt at this was following the below video:
I tried a few other attempts with only CoffeeTime modifying my original BIOS. However, I think I’ve reached my limit. I’m a complete novice at this stuff and I hope I’m just overlooking something simple to overcome. Any help is appreciated, and if I missed any relevant information, please let me know and I’ll do my best to share.