Hi,
I made the terrible mistake of setting the bios to undervolt the same amount as was stably used in throttlestop (how very dare me) and the machine is now in a bootloop (no display, keyboard lights come on then resets).
I have retrieved the bios using the ch341 programmer and I also have got the bios files from pcs. The bios file retrieved is 16mb.
I cant get fpt or fptw working at-all, have tried multiple oses including win 7, 10, dos and linux tna and all versions of (cs)me.
I used neoprogrammer and asprogrammer to retrieve the bios several times and they were all verified in HxD as being identical, whether parts of the bios file are identically protected is another matter…
I have had a fair look at several uefitool versions but it seems I cannot replace anything in the bios file i retrieved. (I was hoping to paste bits of the bios file from pcs into my retrieved bios in order to fix it but alas) Please can anybody help?
I have the files if required. I’m hoping I don’t need to get a pre programmed physical bios chip and solder it to the board.
I’d much rather someone with more experience in this area throw me a rope and provide me with a bios image ready to flash to the 25q128jvsq chip, I don’t mind contributing to someone who can provide this file…
Many thanks,
Steve
Edit by Fernando: Thread moved into the “BIOS Requests” Category and title shortened/customized
Isn’t this a GK7CP0S ???
Deepwater Titan X9TI-R, CLEVO GKXCX7X_MBPGK7CP7C, Machenike F117-FPE MBPGK7CP7C…whats the OEM barebone using this TongFang board?
I can share a X9Ti-R Series GK7CP7C (GK7CP0S) bios dump.
Hi, I’m happy to say I have resolved the issue. I tried erasing the 25q128jvsq chip and flashing the image I retrieved from it previously in the hope that the laptop would realize and load defaults removing the cpu undervolt. That did not work. I then tried using uefitool 0.28. This allowed me to edit the BIOS section on the image and I then replaced that section with the manufacturers bios. I then erased the chip, verified, flashed the modified bios, verified then after a few reboots the laptop came back to life, albeit with a weird feature… Before all this happened there was a so called “turbo” button (reminds me of the good old 486 days) and the turbo button used to switch between setting the 8750 cpu between a 45w TDP and a 68w TDP. Now the cpu seems fixed on either a 68w TDP (overclock) or 45w TDP and if the “turbo” button is pressed the fans just go to max setting with no change to the TDP. I’ve had a look in bios settings and have tried turning off and on overclock mode but the turbo button is just adjusting the fans and NOT switching the cpus TDP. Oh well, thanks for offers of resolution folks. I’m not sure why uefitool NE versions don’t allow a replace/merge option but I suppose I did learn from the NE version was that the bios was protected with encryption which required me to use .28 version to delete the entire BIOS section and replace with the 10mb manufacturers bios instead of just replacing a chunk to amend just the cpu undervolt section as doing that would not have worked.
Thanks again,
Steve
Before this, I ran into a very similar issue while working on a Tongfang/Clevo BIOS recovery, and I can confirm that UEFITool 0.28 is often much more reliable than the newer NE builds when dealing with protected or partially encrypted BIOS regions.
Your note about the Turbo button behavior is particularly interesting. It sounds like the BIOS region was successfully restored, but some EC-related power profile mapping may not have been fully preserved during the rebuild, which would explain why the button now only ramps the fans instead of switching CPU TDP states.
For anyone working with SPI flashing tools during recovery, I recently shared some practical notes about NeoProgrammer, especially around dump verification and Winbond chip handling.