Hello.
Did you buy Predators for the whole family?
BIOS mod.
Hello.
Did you buy Predators for the whole family?
BIOS mod.
Ahahahahah me and my negotians in this big world! This predator i bouth with a short circuit in the main board, and for my luck, i managed to recovery it
I’ll sell it as refurbishd, but before I’m going to play with him a little, this is a 1660ti (my old was rtx2060)
Tks one more time, with out you I would be nothing
Sorry, I didn’t notice that UVE version 100.0.9.2 was used.
Fixed.
Sorry, I didn’t notice that UVE version 100.0.9.2 was used.
Fixed.
@Sweet_Kitten not yeat, I think the set vars didn't work...
Yes, but I’m sure that I didn’t make a mistake. 0x17 and 0x6D1 are set to 0. Did you reboot the system after setting variables?
Yes, but I’m sure that I didn’t make a mistake. 0x17 and 0x6D1 are set to 0. Did you reboot the system after setting variables?
Yes, same way that always i did: Run 1 Set Vars and reboot. Run 2 flash and gave me this error…
I generated again the files, take a look if there is something wrong:
https://drive.google.com/file/d/12STc2lD…iew?usp=sharing
I see that the values have not changed. You can see details in the text .log file.
I see that the values have not changed. You can see details in the text .log file.
Can you modify the last files I upload again? I thik i found the problem: Windows update did a update in my bios from version 1.11 to 1.12…
No problem, I gona stay with this locked BIOS, anyway i apreciate you help again my friend…Thanks so much 
Hello, i am also wanting a modded bios for the ph315-52
bios ver 1.12
i have dumped the bios with a ch341a using flashrom
bios > drive dot google dot com/file/d/1FEBM-IRimQ3lru0zyLuatH6a7EIHrbXE/view?usp=sharing
specs:
i7-9750h
2060
24gb ram
Thanks, i am pretty new to bios modding so please tell me if anything else is required.
hello dear friends, how are you? Can anyone help me to unlock the bios of my helios predator 300 with rtx 2070? tnks
can anyone help me?
@Sweet_Kitten
I was trying to undervolt the system using unlocked bios since i recently repasted my helios 300
But now it is not booting. It boots but no display and after a min reboots.
I think i set the undervolt too high
Pressing power button for 15sec also does not reset it.
I do not have any experience with flashing chips
Also i do have a cloud backup of the unlocked and locked bios(i think) but dont know how to start
Any help is apperciated
It’s a straightforward process. You need 16 MByte file on your computer and an SPI prog. Then you connect SPI prog with chip and write its memory with the file.
1 Like
It’s same.
I can’t provide the location since I don’t have a motherboard of ph315-52.
1 Like