No you dont, the board can be re-programmed with the latest available bios file on ASRock support model, the images are fully regions expanded structure, all you need is to remove the CAPsule header.
I did remove the CAPsule header of the BIOS, otherwise the BIOS image file size is too large for the BIOS chip. However, the rebuilt BIOS would boot up but no display.
That’s why I need a working copy that extracted from a working Z87 OC Formula board. Thanks.
You’re sure of this… a bios corruption?..
Very strange the flashed image didn’t work…
May i ask if after programmed, its was dumped and compared to data source?
Have you try other program apps besides the one used witch i dont know nothing about it…
I know it sounds strange. But after that I also chat with Copilot and Gemini to work out a working BIOS.
I ever replacing ME Region, BIOS Region and Hex editing…and so on, but nothing works.
I did not compared with data souce, But I also ask ASRock tech support for help, but they provide poor service and only gave the same BIOS image with CAPsule header removed.
It is not related to what programmer I used, I have tried Neoprogrammer and CH341A programmer.
Oh i see…your an AI man on fixing firmware on death boards, good for you stick with them all then.
And yes… the ASRock support did more than deserved on a remote firmware request on product out of warranty, and as you can see… the same solution, so to “dig” deeper in diagnosing the board issue…your AI “buddies” will take care of you, good luck, all the best.