[Request] Xeon-W1xxx support for ASRock B560M Pro4

Greetings! I got a Xeon W-1390P (equivalent to i9-11900K in terms of specs) for quite cheap (nearly 80 bucks) and it’s currently being delivered to me.

With that, I got a spare ASRock B560M Pro4 and wanted to use the CPU with it. The W480 and W580 boards here are quite hard to find, so I would love to just repurpose what I already have. Is there any ways to mod the B560 firmware to run Xeon CPUs like you could back in the Skylake days? Will disabling Intel ME be enough for the CPU to work, provided that I’m fine with losing TPM?


Edit by Fernando: Thread title shortened

Took a look around Xianyu and it seems that BIOS modding is out of the question - people there said that you need to replace the PCH with W580. I think your best solution now (money and effort-wise) is to look for scrap AIO motherboards which are going rampant in VNmese 2nd market. I’ve seen bundles with W1390P so theoretically speaking there shall exist a board with W-series chipset.

Friend, did you manage to do anything?

Nope. The mobo started up, the fan twitched for like 1 second then immediately shutted itself off, even after disabling ME via HAP bit

My observation is that the CPU SKU check is done in the BUP region of the Intel ME, patching it would invalidate the signatures and made the machine unbootable.

You are right, I disassembled the BIOS of my board and there is a microcode that will allow the Xeon W-1370P to work, there are no restrictions in the microcode, but there is no way to check ME via HAP and there is no way around it either, good corporation.