soryy if this is the wrong place to post it…
My system is an ASUS Rampage VI Extreme Omega
I have a ASUS HYPER M.2 X16 CARD V2 installed with (4) Intel 1tb NVMe configured for Raid 10
- So they are using RSTe driver 5.5.0.2006 (11/21/2018)
- Then I have (3) other Raid configurations that just use RST driver 17.2.8.1029 (3/27/2019)
So Here it is simple I guess…I like the GUI plain and simple…it let’s me SEE things…
But I can only run with the NVMe GUI
If I had all my Raid running RSTe then they should all show up under the same GUI…if this is even possible…
And if so what drive would I need to install to put the other RST Raids…so it would wokk??
Thanks…
@scorpion :
AFAIK no Intel Rapid Storage Management GUI version supports an Intel RSTe NVMe RAID0 and an Intel RST SATA RAID1 array simultaneously.