Hello everyone,
I want to ask for advice please.
My GA-EP43T-UD3L Rev 1.0 (P43 & ICH10) systemboard accepts Windows XP installation without any problems however I am unable to install Windows 7.
(Windows XP and 7 are modified with AHCI drivers integrated. Windows XP I modified back in 2009 and it installs flawlessly (x86 & x64))
After the first restart when installing Windows 7 Ultimate x64 theres a blue screen for 0.5 seconds then the system restarts.
I am not using USB3, I use a USB2 Flashdrive on the USB2 ports.
Windows 7 (AHCI drivers integrated) detects the hard drive (Verbatim SATAII SSD) correctly.
Steps I tried:
-updated BIOS to latest version (F10d (previous version F2))
-used different RAM modules
-attempted installation from USB Flashdrive and DVD Disc
-IDE and AHCI settings
-Fail Safe settings
-upgrade Windows XP to Windows 7 (blue screen after first restart for 0.5 seconds then restart)
Edit by Fernando: Thread title customized and shortened
I think i will have to try find another systemboard and see if it will accept Windows 7.
I really thought this systemboard would be Windows 7 compatible but it seems it was released before Windows 7 existed.
I am glad it accepts Windows XP but I would love to have a system that works with Windows XP and 7.
I managed to capture the error code on the blue screen: 0x0000007B
Apparently its a AHCI driver mismatch. Not sure why as I integrated / slipped the AHCI driver v 11.2.0.1006 in to the Win7 installation source.
I tried installing the modded + signed version at the “Where do you want to install Windows?” but its not accepted. Windows does not think the modded + signed driver is signed. Strange . . .
As per Google I tried connecting the SSD to a different port on the systemboard - apparently half of the ports are controlled by ICH10 and the other half by a JMicron controller. This also did not work.
I won’t you try a simple official “straight” Windows 7 ISO… as far i can remember, Windows 7 was able to rum without any issues on this model, i think you’re making a big noise for nothing from a user mistake side.
Hey,
You are right, I just tried your suggestion an hour ago and it worked.
I did not think to try the standard unmodified version until an hour ago and unbelievably it works.
Thank you for replying I do appreciate it very much.
Damn I have been trying everything and anything for a week to install Windows 7 on this model.
While we are on the topic of this model maybe you can help me with something else please: The system time and date is always out and I always have to select a BIOS profile to load. The BIOS does not remember the last settings. I replaced the battery and updated the BIOS to latest version.
Is there anything else I can try?
A voltage below 2/2.5v is not advisable… other than that, a bad IC, an HW issue on the CMOS circuit. corrosion/moister on SOIC/DIP8 socket/IC legs, this is common on agged boards.
Depending on your weather region globe, a cleaned board, then pass moister/electric remover and finish it with a light layer of Silicone oil, don’t clean it after this one, but don’t leave too many concentrations to avoid circuit passage.
Thank you very much for the information I appreciate it very much.
I will try your suggestion and hopefully it can work.
Thank you again 