Now Starting Test: TD 9.24 U1 U2 Test (Configuration Index 0x00) - Device State Configured
Start time: Sat Jul 18 12:32:52 2015

Configuration Index 0x00 has a Configuration Value of 1
Initializing the device to the Configured state with Configuration Value 1


Testing the Link State U2
Device will be enabled for U1/U2 entry by SetFeature()
Sending a Set_Feature(U2_ENABLE)
Sending a Get_Status to the device
The device reported that U2 is enabled
SetFeature(U2_ENABLE) succeeded
Setting the parent port of the device to initiate the Link State U2 with 256us timeout.
Current Link State:  U2(0x2)
Link State is U2
Set Parent Port Link State = U0
Clearing U1 and U2 settings
Sending a Clear_Feature(U2_ENABLE)
The device reported that U2 is disabled
Verifying that Link State is U0
Current Link State:  U0(0x0)
Port resumed to U0

Testing the Link State U1
Device will be enabled for U1/U2 entry by SetFeature()
Sending a Set_Feature(U1_ENABLE)
Sending a Get_Status to the device
The device reported that U1 is enabled
SetFeature(U1_ENABLE) succeeded
Parent port will be configured to initiate U1
Setting the parent port of the device to initiate the Link State U1 with 1us timeout.
Current Link State:  U1(0x1)
The Link State is U1.
Set Parent Port Link State = U0
Sending a Clear_Feature(U1_ENABLE)
Current Link State:  U0(0x0)
Port resumed to U0

Testing U1 and U2 enabled at the same time.
Device will be enabled for U1/U2 entry by SetFeature()
Sending a Set_Feature(U1_ENABLE)
Sending a Get_Status to the device
The device reported that U1 is enabled
SetFeature(U1_ENABLE) succeeded
Sending a Set_Feature(U2_ENABLE)
Sending a Get_Status to the device
The device reported that U2 is enabled
SetFeature(U2_ENABLE) succeeded
Enable U1 for parent port
Enabled U2 for parent port
Current Link State:  U2(0x2)
Sleeping for 520ms
Current Link State:  U2(0x2)
Current Link State:  U2(0x2)
Link State is U2
Resuming parent port
Set Parent Port Link State = U0
Setting the parent port of the device to reject Link State U1
Setting the parent port of the device to reject Link State U2
Sending a Get_Status to the device so link will return to U0
Sending a Clear_Feature(U2_ENABLE)
Sending a Clear_Feature(U1_ENABLE)
The device reported that U2 is disabled
Clear_Feature(U2_ENABLE) succeeded
The device reported that U1 is disabled
Clear_Feature(U1_ENABLE) succeeded
Current Link State:  U0(0x0)
Port resumed to U0


Testing the Link State U2
Device will be enabled for U1/U2 entry by Force Link PM Accept
Setting the parent port of the device to initiate the Link State U2 with 256us timeout.
Current Link State:  U2(0x2)
Link State is U2
Set Parent Port Link State = U0
Clearing U1 and U2 settings
The device reported that U2 is disabled
Verifying that Link State is U0
Current Link State:  U0(0x0)
Port resumed to U0

Testing the Link State U1
Device will be enabled for U1/U2 entry by Force Link PM Accept
Parent port will be configured to initiate U1
Setting the parent port of the device to initiate the Link State U1 with 1us timeout.
Current Link State:  U1(0x1)
The Link State is U1.
Set Parent Port Link State = U0
Current Link State:  U0(0x0)
Port resumed to U0

Testing U1 and U2 enabled at the same time.
Device will be enabled for U1/U2 entry by Force Link PM Accept
Enable U1 for parent port
Enabled U2 for parent port
Current Link State:  U2(0x2)
Sleeping for 520ms
Current Link State:  U2(0x2)
Current Link State:  U2(0x2)
Link State is U2
Resuming parent port
Set Parent Port Link State = U0
Setting the parent port of the device to reject Link State U1
Setting the parent port of the device to reject Link State U2
Sending a Get_Status to the device so link will return to U0
The device reported that U2 is disabled
Clear_Feature(U2_ENABLE) succeeded
The device reported that U1 is disabled
Clear_Feature(U1_ENABLE) succeeded
Current Link State:  U0(0x0)
Port resumed to U0


Re-enumerating device to make sure that all U1/U2 settings are cleared

Stop time: Sat Jul 18 12:32:58 2015
Duration:  6 seconds.
Stopping Test [ TD 9.24 U1 U2 Test (Configuration Index 0x00) - Device State Configured:
     Number of: Fails (0); Aborts (0); Warnings (0) ]


===============