@Lost_N_BIOS
Hello, I cannot get post logo but I see indicator lights on my usb when I press ctrl home keys. After that it stops to read usb drive and does nothing. Is it a problem with renaming the bios file wrong?
@XPWELL64 - No, probably you flashed a badly modified BIOS. BIOS name does not matter, if and when it does the flasher will tell you no.
What did you do that caused this? How did you flash etc? You will need CH341A + SOIC8 test clip with cable, if you cannot at least get to DOS (doubtful if you don’t see anything on screen)
I flashed by afudos, it shutted down and cannot open again.
I have got recovery block in my bios.
So, you used ES DOS AFU made for MUCH earlier BIOS version I assume (using /GAN)? If so, nothing you can do until you have programmer in hand, unless you can get to DOS which is very unlikely.
Recovery block probably trashed by AFU not made for this generation BIOS. If you know tested confirmed working recovery method for this model via some hotkey combo, you can try, but I doubt you will have any luck. Maybe you get lucky, but don’t get your hopes up
I used the latest bios which has recovery block.
All BIOS have "recovery block" This means noting if BIOS is bricked bad enough.