hey every one, first of all i want to say this is amazing site, the most professional forum i met
my fx505gm turned off while bios update… i went for my buddy to program the bios for original one from the site.
now i cant see my serial numbers but worst the boot time is 30 seconds and not 3 like before.
i was searching online and i think its maybe the intel ME issue. Intel ME Version: v0.0, Build 0, Hotfix 0
there is some way that i can fix it without programmer? maybe afuwin or something like that? what can i do?
thx for your help
bios version: 306 (i dont 307 because the intel volt lock)
Unless you have an unlocked Flash Descriptor, you’ll probably (try the steps of the guide) need to use the hardware programmer again.
how can i edit the bios bin file to unlock this option? BCP or UEFI?
i have unlock bios. i can read an write with afuwinx64 but cannot with intel flash tool… tried to flash only me with afu but cmd was freezing, tried also make dos usb boot but can make it work… what can i do else?
Follow [Guide] Unlock Intel Flash Descriptor Read/Write Access Permissions for SPI Servicing. If you can dump the CSME region via “fptw64 -me -d csme.bin” and can then re-flash it back via “fptw64 -me -f csme.bin”, then you have an unlocked FD and we can proceed.
thx for the replay… i can dump this file but i cant re-write it via fptw64. but i can flash bios file with afuwin
— Flash Devices Found —
ID:0xC22018 Size: 16384KB (131072Kb)
GbE Region does not exist.
Error 238: The host CPU does not have write access to the target flash area.
To enable write access for this operation you must modify the descriptor
settings to give host access to this region.
FPT Operation Failed.
btw i can see this lines on uefitool
BIOS access table:
Read Write
Desc Yes No
BIOS Yes Yes
ME Yes No
GbE Yes Yes
PDR No No
EC No No
Flash chips in VSCC table:
1F4700h
C22018h
EF4018h
Yeap, the FD is locked. It needs to be unlocked first using the steps of the guide.
if i send you the bios bin file you think you can edit it for afuwin flash bios and it will work?
No, it does not work like that. The FD needs to be unlocked on your side.
As mentioned in PM, you’re already being helped by the ME FW professional here 
Test S3 sleep bug >> Put system to sleep (S3, not hibernate or hybrid sleep) for 2 minutes, wake it up and try to dump ME region with FPT, then try to write it back.
If success, then you can use this bug to help you bypass this, otherwise you need to do pinmod (E.1) to unlock FD, or get flash programmer.
found this lines inside the txt
Setting: Me FW Image Re-Flash, Variable: 0x7C5 {05 91 45 11 46 11 D8 01 01 00 C5 07 10 10 00 01 00}
0x2F33B Option: Disabled, Value: 0x0 {09 07 04 00 30 00 00}
0x2F342 Option: Enabled, Value: 0x1 {09 07 03 00 00 00 01}
but i cant boot to efi, tried all the options and can go to efi shell