Hello,
first post here for me, thank you for you patiente.
At job we use a recovery BootCD based on BartPE. We bought several D3LL machines (Opt1plex 3020) with ‘Intel 8 Series/C220 sata AHCI - 8C02’ SATA controller.
(Hardware ID: PCI\VEN_8086&DEV_8C02&SUBSYS_06121028&REV_04)
On this site i found a working driver. Test it installing Windows XP 32bit (TXTSETUP.OEM F6-floppy).
When i build my BartPE USB boot based, i’ve BSOD.
Why driver works on original XP cd and not for BartPE ?
To fight BartPE obsolescence, can you suggest another BootCD envirnoment that support plugins ?
Thank you for your time,
m.
@myspacee :
Welcome at Win-RAID Forum!
Usually the 32bit Intel RST driver v11.2.0.1006, which has been modified and digitally signed by me, should work. Important is, that you choose nothing else than the correct Intel SATA AHCI Controller (check the DeviceID!).
Btw: Which was the error message you got?
Regards
Dieter (alias Fernando)
P.S.: This post has been written on a cell phone.