Hello to everyone!
I have Intel AMT Version: 6.2.61, Build 3535 AMT + Corporate/KVM with latest chipset drivers from ME topic and problem I want to fix is not being able to shut down my Dell E6410 with Win10. Fastboot in Win10 disabled, in Win7 everything worked great.
I have several questions I did not find answers for in ME topic.
-
How do I choose correct version of ME System Tools? What is IBX or CCK?
ME 6 Ignition IBX
For ME Ignition IBX v6
ME 6 Ignition CCK
For ME Ignition CCK v6.0.50 -
To what version I can update my ME 6 firmware?
-
There are instructions\examples how to update ME firmware for CSME v13+ and CSME v12, but not for ME 6. So how to do it?
-
What are risks if something goes wrong with ME firmware updating? Bricking laptop? In case you don’t have a flash programmer and do not want to disassemble laptop and unsolder bios chip.
There is no info about this in the topic. Mitigation techniques? For example keep battery charged and working and probably some information for vendor specific emergency ME firmware recovery procedures like “Insert FAT32 formatted flash drive with specific files in USB port and press some key combination”. -
“If a SPI/BIOS image is not available, run FWUpdate tool with parameter “-save fw.bin” and load the resulting “fw.bin” image into ME Analyzer instead.”
I did not find -save parameter in FWUpdate tool in ME Tools for ME 6 IBX r2. -
What to do with this? (text below)
Intel(R) MEManuf Version: 6.0.40.1214
Copyright(C) 2005 - 2010, Intel Corporation. All rights reserved.
Platform stepping value is 5
FW Status Register: 0x00000245
FW Status Register1: 0x60000000
CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
Phase: HOSTCOMM Module
Get FWU info command…done
Get FWU version command…done
Get FWU feature state command…done
Get ME FWU feature capability command…done
Get ME FWU platform type command…done
Feature enablement is 0x66DC45
gFeatureAvailability value is 0x1
vsccommn.bin was created on 00:29:16 07/16/2009 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4016) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4016) BIOS VSCC value checked
FPBA value is 0x0
RCBA Base Address read as [0xFED1C000] expecting 0xFED1C000
Data read from RCBA offset for SPIBA: 0xFED1F800
Data read from offset [0x00000038]: 0x00000000
Data read from offset [0x00000028]: 0x00017044
Data read from offset [0x3440]: 0xDEADDEED
KVM sampling engine and Sprite tests are skipped
because Intel(R) integrated graphic is not available
Request Intel(R) AMT extended test command…done
Warning: Intel(R) AMT extended test command has been blocked
Found an Intel Wireless device
Request Intel(R) AMT full test command…done
Warning: Intel(R) AMT test command has been blocked
Error 9296: MEManuf Test Failed