Everything works. I also did upgrade to A15.
Thank you very much for your help and patience.
Thank you very much @plutomaniac for all your help. I have a couple of questions:
- How does your fix_me.bin work?
- Has anyone been able to get Remote Desktop to work? I click "Connect" in MeshCommander, I get a quick "Setup…" and then it goes back to "Disconnected"
Thanks!
Hello Good afternoon if you have a backup WinRAR I need the Dell Precision T3600 mx25l6405d and mx25l3205a software you can install
@erta - if you need BIOS dumps from anyone in this thread, you may need to send them private message and hopefully they will get email notifications.
Also, there is some BIOS dumps here in this thread for T3600 - Dell Precision T3600 Bios A14
I did not check dump sizes, you may need to split 12MB BIOS into 4MB & 8MB
SPI and ME (without AMT - ME fix you’ll find some later Posts) Dump you’ll find at 1st Post in this Thread.
Is this what you’re looking for?
hello all together,
i also have a t3600 and seems like the ME is factory disabled.
I am running Bios A18.
I made a dump from the SPI (spi.bin) and ME (me.bin).
After that i changed with the FlashImageTool (v7.1.60.1191) my me.bin.
but now i don’t know how to go on to get my own me_fix.bin.
The build give me 4 files (outimage(1).bin, outimage(2).bin, outimage.bin and outimage.map).
As I always try to doble check everything I got confused because neither the size of the files match with my original me.bin nor if i check the “.map” file the start and end address matches. I always tried to compare to the given original spi.bin and me.bin from the first post, the me_fix.bin from @plutomaniac and the files i generated…
Can someone help me with that? How can I make my own me_fix.bin from my own dumps? I also tried to follow several conversations on this forum, but seems like I miss something essential.
I think there was a clean ME for the t3600 in this thread DELL T5600 - BIOS A15 & A17 - #23 by Lost_N_BIOS