[Discussion] UBU Tool related Questions/Reports/Suggestions

SoniX · August 23, 2024, 10:20pm

@ChrisM

Send this BIOS file.

SoniX · August 24, 2024, 12:09am

To all UBU users.
Please just describe the problem and attach the BIOS file or link.

Example:

-The GOP Driver file is not being replaced
The version is not defined.
-<“BIOS file”>

Thank you all very much,

ChrisM · August 24, 2024, 12:10am

This is the FPT dumped full bios.

Dell Vostro 3670 2.33.zip (7.8 MB)

As a side note, when I downloaded your entire (a15) Modding.rar, the UBU_v1_80_a15.rar wouldn’t open, so I downloaded the UBU_v1_80_a15.rar individually, and it did open/extract.

ThomasRhin · August 24, 2024, 5:18am

-The intel EFI GOP Driver Xe file is not being replaced
I found the BIOS of both Z590 mobos share the same issue.

Sorry the BIOS file size is too big for the forum limitation. I linked it to MEGA cloud.
ASUS ROG Maximus XIII BIOS file link

Gigabye Z590 Aorus Elite

SoniX · August 24, 2024, 10:21am

@ThomasRhin

I am aware of this problem of two different versions of the GOP,

Try the following:

Open UBU.cmd
Find string 31003700
Change the entire line

set str_patt=310037000000000000000000

This should help you

RoadrunnerDB · August 24, 2024, 1:31pm

@SoniX

Unfortunately, the microcode update hasn’t been working since version 1.80a14. ASRock Z790 Pro RS…
The MMTool variant doesn’t seem to be in order.

Z790ProRS14.01

westlake · August 24, 2024, 1:59pm

@RoadrunnerDB

Works with mmtool_a5.exe (v5.2.0.25).

ChrisM · August 24, 2024, 2:37pm

I placed both MMT 5.2.0.24 and 5.2.0.25 directly into the UBU folder. This time, the script indicated it was using MMT 5.2.0.24 (which makes sense given my carryover thread post), and the microcodes were replaced.

I’m still having the removed Padding file issue, but MC replacement did process in the UBU a15 folder with the inclusion of MMTool 5.2.0.24.

Still getting the EFI Realtek UNDI Driver - Unknown issue.

RoadrunnerDB · August 24, 2024, 3:20pm

I completely forgot that AMI doesn’t want it to be distributed.

But there’s a new problem.

@SoniX

Network Realtek modules are not being swapped. The CMD stops, see the image!

westlake · August 24, 2024, 3:43pm

@ChrisM

The unknown EFI problem is independent of MMTool. It is only responsible for replacing the files. Since that EFI part is unknown to UBU, it naturally does not offer anything instead. Even if it could replace it without problems.

@RoadrunnerDB

But the UBU works exactly as it should. Hopefully you didn’t try this with MMTool, but without.

realtek

In general: BIOS can be modified in several rounds, not just one. If something does not work, you should try it with MMTool. If it doesn’t work, try it without. It’s not complicated.

RoadrunnerDB · August 24, 2024, 4:05pm

Without MMTool, it works. But that’s not really a solution, is it?

As far as I understand, it’s about the AMD platform, where there were issues replacing the microcode.

The UEFI Replacer had worked for all modules (Intel) for me so far. But starting from version 1.80a14, it no longer does…

ChrisM · August 24, 2024, 5:35pm

14a UEFIReplace v0.25.0 will be used:

Details: (open/hide by a click)

                  Main Menu
        [Current version in BIOS file]
1 - Disk Controller
EFI Intel RST RAID Driver - 17.8.1.4572
EFI NVMe Driver present
2 - Video OnBoard
EFI GOP Driver SKL-AML - 9.0.1085
RAW GOP VBT SKYLAKE - 221
3 - Network
EFI Realtek UNDI Driver - 2.041
4 - Other SATA Controller
5 - CPU MicroCode
View/Extract/Search/Replace
S - AMI Setup IFR Extractor
O - Option ROM in other GUIDs
0 - Exit
RS - Re-Scanning
A - About
Choice:

14a MMTool 5.2.0.24 used:

Details: (open/hide by a click)

                  Main Menu
        [Current version in BIOS file]
1 - Disk Controller
EFI Intel RST RAID Driver - 17.8.1.4572
EFI NVMe Driver present
2 - Video OnBoard
EFI GOP Driver SKL-AML - 9.0.1085
RAW GOP VBT SKYLAKE - 221
3 - Network
EFI Realtek UNDI Driver - 2.041
4 - Other SATA Controller
5 - CPU MicroCode
View/Extract/Search/Replace
S - AMI Setup IFR Extractor
O - Option ROM in other GUIDs
0 - Exit
RS - Re-Scanning
A - About
Choice:

westlake, 14a had no EFI issue running with and without MMTool. I’m not posting choice 3, but it shows a newer (2.067) replacement option.

Edit 1: The Realtek folder under Files in 15a is identical to 14a.

Edit 2: Full 14a run with MMTool:

Details: (open/hide by a click)

^{Scanning BIOS file backup.bin.}
^{Please wait…}
^{Manufacturer - Default string}
^{Model - Default string}
^{BIOS release - 5.13 08/31/2023}
^{BIOS version - 00.30}
^{BIOS platform - AMI Aptio 5}

^{[EFI Drivers - Find and Extract]}
^{Intel RST GUID 8C2E10DB-280F-4D4C-9B6E-C4C2A8A4C629}
^{Intel GOP SubGUID D8248140-88B5-4C14-9E9F-FD1CFA9D071E}
^{AMI NVMe GUID 634E8DB5-C432-43BE-A653-9CA2922CC458}
^{Realtek Undi GUID 4953F720-006D-41F5-990D-0AC7742ABB60}
^{Intel GOP VBT GUID 56752DA9-DE6B-4895-8819-1945B6B76C22}

^{[OROM - Find and Extract]}
^{VBIOS in GUID FD41D244-F0FB-4FD0-8FD6-4276BD4323D0}
^{OROM in GUID 7C3B8701-2C3B-49FA-A529-F31D441265B1}
^{OROM in GUID 6357578A-52D1-4517-BE96-10391404754C}
^{OROM in GUID 914AB3BE-A2C2-463A-B77D-F820FBBA180E}

^{UEFIReplace v0.25.0 will be used.}
^{MMTool Aptio v5.02.0024}

^{Waiting for 3}

^{Main Menu}
^{[Current version in BIOS file]}
^{1 - Disk Controller}
^{EFI Intel RST RAID Driver - 17.8.1.4572}
^{EFI NVMe Driver present}
^{2 - Video OnBoard}
^{EFI GOP Driver SKL-AML - 9.0.1085}
^{RAW GOP VBT SKYLAKE - 221}
^{3 - Network}
^{EFI Realtek UNDI Driver - 2.041}
^{4 - Other SATA Controller}
^{5 - CPU MicroCode}
^{View/Extract/Search/Replace}
^{S - AMI Setup IFR Extractor}
^{O - Option ROM in other GUIDs}
^{0 - Exit}
^{RS - Re-Scanning}
^{A - About}
^Choice:5

^{╔═════════════════════════════════════════╗}
^{║ MC Extractor v1.94.2 r276 ║}
^{╚═════════════════════════════════════════╝}
^{╔════════════════════════════════════════════════════════════════════════════╗}
^{║ Intel ║}
^{╟─┬─────────┬─────┬─────────┬────────┬──────────┬─────┬───────┬─────────┬────╢}
^{║#│ Type │CPUID│Platforms│Revision│ Date │State│ Size │ Offset │Last║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼─────────┼────╢}
^{║1│Microcode│906EA│ 22 (1,5)│ F4 │2023-02-23│ PRD │0x19800│0x1D50400│Yes ║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼─────────┼────╢}
^{║2│Microcode│906EB│ 02 (1) │ F4 │2023-02-23│ PRD │0x1A000│0x1D69C00│Yes ║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼─────────┼────╢}
^{║3│Microcode│906EC│ 22 (1,5)│ F4 │2023-02-23│ PRD │0x19C00│0x1D83C00│Yes ║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼─────────┼────╢}
^{║4│Microcode│906ED│ 22 (1,5)│ FA │2023-02-27│ PRD │0x1A000│0x1D9D800│Yes ║}
^{╚═╧═════════╧═════╧═════════╧════════╧══════════╧═════╧═══════╧═════════╧════╝}
^{These microcodes are in your BIOS file}
^{GUID 17088572-377F-44EF-8F4E-B09FFF46A070}

^{[Intel CPU MicroCode]}
^{F - Find and Replace from MCUpdate.txt}
^{V - View/Edit MCUpdate.txt}
^{U - Find and Replace from USR_mCode.txt}
^{E - View/Edit USR_mCode.txt}

^{[MC Extractor]}
^{X - Extract all CPU microcodes}
^{S - Search for available microcode in DB.}
^{0 - Exit to Main Menu}
^Choice:F
^{CPUID 906EA found.}
^{Files\Intel\mcode\1151v2\cpu906EA_plat22_ver000000F8_2024-02-01_PRD_47291E44.bin}
^{Checksum correct.}
^{CPUID 906EB found.}
^{Files\Intel\mcode\1151v2\cpu906EB_plat02_ver000000F6_2024-02-01_PRD_9F8FF344.bin}
^{Checksum correct.}
^{CPUID 906ED found.}
^{Files\Intel\mcode\1151v2\cpu906ED_plat22_ver00000100_2024-02-05_PRD_78F54C97.bin}
^{Checksum correct.}
^{Generate FFS with Microcode}

^{╔═════════════════════════════════════════╗}
^{║ MC Extractor v1.94.2 r276 ║}
^{╚═════════════════════════════════════════╝}
^{╔══════════════════════════════════════════════════════════════════════════╗}
^{║ Intel ║}
^{╟─┬─────────┬─────┬─────────┬────────┬──────────┬─────┬───────┬───────┬────╢}
^{║#│ Type │CPUID│Platforms│Revision│ Date │State│ Size │ Offset│Last║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼───────┼────╢}
^{║1│Microcode│906EA│ 22 (1,5)│ F8 │2024-02-01│ PRD │0x19C00│ 0x18 │Yes ║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼───────┼────╢}
^{║2│Microcode│906EB│ 02 (1) │ F6 │2024-02-01│ PRD │0x1A000│0x19C18│Yes ║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼───────┼────╢}
^{║3│Microcode│906ED│ 22 (1,5)│ 100 │2024-02-05│ PRD │0x1A000│0x33C18│Yes ║}
^{╚═╧═════════╧═════╧═════════╧════════╧══════════╧═════╧═══════╧═══════╧════╝}

^{Note: Microcode #1 is not in the database! You can help this project}
^{by sharing it at https://win-raid.com forum. Thank you!}

^{Note: Microcode #2 is not in the database! You can help this project}
^{by sharing it at https://win-raid.com forum. Thank you!}

^{Note: Microcode #3 is not in the database! You can help this project}
^{by sharing it at https://win-raid.com forum. Thank you!}
^{These microcodes will be entered into your BIOS file}

^{R - Start replacement}
^{A - Start replacement Alternative with MMTool}
^{0 - Cancel}
^Choice:R
^{[Preparing for replacement]}
^{BIOS file backup}
^{[Replacement]}
^{mCode FFS: parseIntelImage: unknown flash descriptor version 0.0}
^{parseVolume: non-UEFI data found in volume’s free space}
^{parseSection: section with unknown type 00h}
^{parseSection: section with unknown type 00h}
^{parseSection: section with unknown type 1Ah}
^{parseFile: non-empty pad-file contents will be destroyed after volume modifications}
^{reconstructIntelImage: discovered unexpected 0.0 descriptor version, trying to continue…}
^{File replaced}
^{Real Pointer}
^{FIT Offset - FFD50100 == FFD50100}

^{Real FIT}
^{01 mCode Offset - FFD50298 != FFD50400}
^{Fixed - FFD50298}
^{mCode Size - 19C00}
^{02 mCode Offset - FFD69E98 != FFD69C00}
^{Fixed - FFD69E98}
^{mCode Size - 1A000}
^{03 mCode Offset - FFD83E98 != FFD83C00}
^{Fixed - FFD83E98}
^{mCode Size - 1A000}
^{Changes FIT saved}
^{Press any key to continue . . .}

^{╔═════════════════════════════════════════╗}
^{║ MC Extractor v1.94.2 r276 ║}
^{╚═════════════════════════════════════════╝}
^{╔════════════════════════════════════════════════════════════════════════════╗}
^{║ Intel ║}
^{╟─┬─────────┬─────┬─────────┬────────┬──────────┬─────┬───────┬─────────┬────╢}
^{║#│ Type │CPUID│Platforms│Revision│ Date │State│ Size │ Offset │Last║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼─────────┼────╢}
^{║1│Microcode│906EA│ 22 (1,5)│ F8 │2024-02-01│ PRD │0x19C00│0x1D50298│Yes ║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼─────────┼────╢}
^{║2│Microcode│906EB│ 02 (1) │ F6 │2024-02-01│ PRD │0x1A000│0x1D69E98│Yes ║}
^{╟─┼─────────┼─────┼─────────┼────────┼──────────┼─────┼───────┼─────────┼────╢}
^{║3│Microcode│906ED│ 22 (1,5)│ 100 │2024-02-05│ PRD │0x1A000│0x1D83E98│Yes ║}
^{╚═╧═════════╧═════╧═════════╧════════╧══════════╧═════╧═══════╧═════════╧════╝}

^{Note: Microcode #1 is not in the database! You can help this project}
^{by sharing it at https://win-raid.com forum. Thank you!}

^{Note: Microcode #2 is not in the database! You can help this project}
^{by sharing it at https://win-raid.com forum. Thank you!}

^{Note: Microcode #3 is not in the database! You can help this project}
^{by sharing it at https://win-raid.com forum. Thank you!}
^{These microcodes are in your BIOS file}
^{GUID 17088572-377F-44EF-8F4E-B09FFF46A070}

^{[Intel CPU MicroCode]}
^{F - Find and Replace from MCUpdate.txt}
^{V - View/Edit MCUpdate.txt}
^{U - Find and Replace from USR_mCode.txt}
^{E - View/Edit USR_mCode.txt}

^{[MC Extractor]}
^{X - Extract all CPU microcodes}
^{S - Search for available microcode in DB.}
^{0 - Exit to Main Menu}
^Choice:

Edit by Fernando: Post’s length shrinked by putting the details into “spoilers”

SoniX · August 24, 2024, 7:33pm

:lol:
The bios is new, the sizes are 32, and the problems are old - there is no free space in the volumes.

@RoadrunnerDB

If you don’t want to use MMTool to replace files then:

Open UBU.cmd
Find string ::efi_rebuild
Changed
if %mmtool%==1 to 0

Radu91 · August 25, 2024, 7:31am

@SoniX Hi, any new info about adding new option rom into the bios?
Also I tested ubu a15 with “if %mmtool%==” 1 and 0, I just updated the realtek network. At 79% Gigabyte QFLASH says “INVALID BIOS IMAGE” for the new bios files:

RoadrunnerDB · August 25, 2024, 7:49am

Hi,

Starting with Z400 series motherboards, there is no way to flash directly using onboard tools. The board manufacturer’s signature is altered by the UBU modification.

Either you flash the BIOS chip using a flash module (programmer) or you use “FPTw.exe” via Intel CMS tools from version 16 onwards…

"Update your BIOS with UBU, and save it as ‘Bios.bin’.

Run the Write.bat with administrator rights."
Flash.zip (471.5 KB)

Radu91 · August 25, 2024, 5:51pm

@RoadrunnerDB
I tried it:

Reading HSFSTS register… Flash Descriptor: Valid
--- Flash Devices Found ---
ID:0xC22019    Size: 32768KB (262144Kb)
Error 167: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable
Protected Range Registers.

FPT Operation Failed.

RoadrunnerDB · August 25, 2024, 7:09pm

167: Protected Range Registers are currently set by BIOS, preventing flash access.

This is caused by the BIOS Lock variable set to 0x01 (Enabled):
Code:
BIOS Lock, VarStoreInfo (VarOffset/VarName): 0xA12

How to set the BIOS Lock variable to 0x00 (Disabled):

Make sure you have following values set in BIOS:

Legacy Support: Disable
Secure Boot: Disable

Take USB stick and format to FAT32
Create directory structure EFI\Boot
Download bootx64.zip (765.2 KB)
Put BOOTX64.EFI into Boot directory
Boot from this USB stick
Run command: setup_var 0xA12 0x00
Run command: reboot
9.Attempt to write the modified BIOS again using FPTw.exe.

"Here, Gigabyte has shut things down. Unfortunately, BIOS modding has become a popular activity, leading to considerable damage.

On my motherboard ‘ASRock,’ this restriction is not active."

MeatWar · August 26, 2024, 1:01am

A post was split to a new topic: Using the UEFITool_NE_A68

ThomasRhin · August 26, 2024, 3:41am

SoniX:

I am aware of this problem of two different versions of the GOP,

Try the following:

Open UBU.cmd

Find string 31003700

Change the entire line
set str_patt=310037000000000000000000
This should help you

Thank you very much for replying . I have tried both UBU a14 and a15, and , yes , UBU could replace Intel EFI GOT Xe driver after modifying the strip. However, both Gigabyte Z590 Aorus Elite and Asus Maximus XIII will experience boot failure after flashing the modified BIOS with EFI GOP Xe driver replaced. If the GOP Xe driver remains untouched, everything will be fine. I can confirm it because I have experimented it on both motherboards for almost 10 times. Besides, the UBU always generates 3 GOP Xe drivers as shown in the attachment of screenshot. I don’t know if repeated Xe drivers count for boot failure because the debug code of ASUS mobo indicates it is I/O related. Again , the link of the BIOS.

ASUS Maximus XIII(Z590)

Gigabyte Z590 Aorus Elite

SoniX · August 26, 2024, 11:01am

3 GOP is bad. I’ll think about it,