question to marvel 9230 users.
Does anyone managed to run on fly AES encryption on marvell 9230 controler ?
specification is saying that it supports AES Encryption:
http://www.marvell.com/storage/system-so…oduct-Brief.pdf
in MSU utility I dont have any options to set this (but some users have additional entry info in MSU utility: AES Supported http://forum.asrock.com/forum_posts.asp?..hypoduo-seveice)
i tried also marvelcli and command > aesport -o set -i 3 -p marvell --aeson but I get error
Set configure of AES port 3 failed (error 19: Not supported).
does anybody have any clue how to enable onfly encryption on this controller ?
my info:
BIOS Version 1.0.0.1018
Firmware Version 2.3.0.1053
Boot Loader Version 2.1.0.1006
Driver Version 1.2.0.1035
Chip Revision ID A1
Vendor ID 1B4B
Sub Vendor ID 1B4B
Device ID 9230
Sub Device ID 9230
Port Count 4
Max PCIe Speed 5Gb/s
Current PCIe Speed 5Gb/s
Max PCIe Link 2X
Current PCIe Link 2X
Supported RAID Modes RAID0, RAID1, RAID10, HyperDuo (Capacity), HyperDuo (Safe)
Supported Stripe Size 32K 64K
Maximum PD per Adapter 7
Supported VD Cache None
Maximum VD per Adapter 4
Maximum PD per VD 4
Maximum Port Multiplier 1
it look like, it is some feature, added tothe bios file:
> info -o hba
Adapter ID: 0
Product: 1b4b-9230
Sub vendor ID: 1b4b
Sub device ID: 9230
Chip revision: A1
slot number: 0
Max PCIe speed: 5Gb/s
Current PCIe speed: 5Gb/s
Max PCIe link: 2X
Current PCIe link: 2X
Driver version: 1.2.0.1035
BIOS version: 1.0.0.1018
Firmware version: 2.3.0.1053
Boot loader version: 2.1.0.1006
# of ports: 4
Buzzer: Not supported
Supported port type: SATA
Supported RAID mode: RAID0 RAID1 RAID10 hc(hypper capacity) hs(h
ypper safe)
Maximum SSD in one HyperDuo: 3
Maximum SSD Segment: 3
Maximum disk in one VD: 4
PM: Supported
Expander: Not supported
Rebuild: Supported
Background init: Not supported
Sync: Not supported
Migrate: Not supported
Media patrol: Not supported
Foreground init: Not supported
Copy back: Not supported
Maximum supported disk: 7
Maximum supported VD: 4
Max total blocks: 128
Features: rebuild
Advanced features: event sense code,multi VD,image health,phy
control by port,sata phy ctrl,time setting by application,smart,ata pass through
,remap,access register
Max buffer size: 3
Stripe size supported: 32K 64K
Image health: Healthy
Autoload image health: Healthy
Boot loader image health: Healthy
Firmware image health: Healthy
Boot ROM image health: Healthy
HBA info image health: Healthy
http://images.anandtech.com/doci/6697/AS…vell%20RAID.png