So, that´s my motherboard, so far it has been running with Microsoft drivers. See the following image.
For some reason, when I first tried to install Windows, that storage controller was not being recognized on AHCI mode, but on IDE. After some google search, I found that I needed to use some driver to get the AHCI mode recognized, although the motherboard was not so new. I had to use a gigabyte tool that made some changes to the USB image or something so that the controller could get recognized. (Google Search for: GA-B85M-D3H Windows install AHCI).
For some odd reason, every time I tried to update the storage driver (using any version available, I first used the ones recommended, then I tried the ones that matched my chipset or version, having the same result with all of them), the driver recognized the controller but upon reboot I always got the BSOD. Resetting and running the last known good resolved the trouble everytime. What I want to know is what´s happening? why I can´t update the storage driver?.
If I try to boot on IDE mode, it gives the same error as well.
The question is, what´s going on with this motherboard then? Do I need to change something on the registry before updating? Is there something wrong with my installation?
19-12-2017
Zitat
Update...
Adding more info to the post, I was able to get the ntboot.log (attached), it has 3 boot attemps, the first is the bsod, the second was a pretty slow boot after choosing the last know good on the recovery menu, like 5min. but it booted normally or so, and the third was just a reboot just to check the speed, it came up normal. The thing is the last line of each attemp before showing me the log on screen or going bsod:
1
2
Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
At the first boot, it stops there, the second one:
1
2
3
Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
But it continue booting and I got to the desktop, no errors, but the third:
1
2
3
4
Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
Loaded driver \SystemRoot\system32\DRIVERS\asyncmac.sys
This investigation is getting spooky by the minute. So far I haven´t been able to collect a bsod dump of the error.
Update...
More info found; I don´t know what to believe...
msahci seems disabled...
pciide enabled...
After trying to go back to AHCI, I find this... could it be that I am not on AHCI mode but IDE mode? (on Bios is set to AHCI, is this right?)
Update... again
I tried to enable the IAStor driver manually (which interestingly they were after installation) and then rebooting... and BSOD. Decided to try the recovery console to see what it said, and it showed that the error was because of a bad driver recently installed...
I really would like to know what´s going on with this system???
Another update...
I changed manually from AHCI to IDE via registry and bios and guess what...
It worked...
The question is... now what?
Question added...
Could it be that the drivers have to be installed during Windows installation? Anyone could shed a light on this please?
20-12-2017
Remember that I had the Microsoft drivers for AHCI mode?...
Guess what happened at reboot?
You guessed right my friend... bsod.
Now what´s going on??? why is this happening? how come not even the Microsoft drivers don´t work... could it be... that this motherboard is not really... in ahci mode although the bios and the device manager say it is...
More info later.
Fernando... I seek your wisdom, anyone, please, help me.
ntbtlog.txt (63.6 KB)