I am looking to see if i can add UEFI to my EVGA GPU.
I found a very similar Gigabyte rom with UEFI and have been trying to flash it with Nvflash for the past hour but i cannot get past “GPU mismatch” i tried the mismatch flash and all kinds of command addons with no luck.
This is my card don’t laugh…too hard
but rom version I have is here
anyway can this can be done ? I went through the the how to 3 times and it is a major headscratcher to me.
Here is the vbios i had GPUz extract
thanks
The easier thing to do is to take that GPUZ extract and run it through GOPUpd .
Then try and flash the result back with Nvflash.
Here u go: GK107UEFI.zip (123.1 KB)
Thanks a lot I really appreciate it !
However I think i just got it.
I used this and it is working so far.
@all for all the members that have a NVIDIA GTX 6xx card and didn’t get an UEFI capable BIOS I have found a nice tool provided by Inno3D support. It’s called “Kepler UEFI updater” and updates the EFI section of any Kepler based card so the full UEFI boot mode can be selected inside the mainboard BIOS afterwards. Enjoy… Best regards hanson
Inno3D UEFI Updater.zip (393 KB)
all right, the vbios i sent uses gop 38, idk what that tool use.
I have no idea. Here is the new file extracted with GPUz, i imagine it is modified right ?