So, i tested your D1_M2_B2_251005 on the Shark board, i have a board that has problem running more than 2 slots AND a cpu that has a broken channel wich is a 12 core ES named QDCU ES1.
Booted fine, undervolt in bios is working - offsets are shown in Hwinfo.
I have a couple of questions that you might have already answered in one of the 2 threads, sorry for that if that is the case
-
can i use UPT to remove light and beep sound?
-
i have a B2 bios and locked CPU. I remember that TBU procedure has his own undervolt in the driver, if i touch the voltages after boot with Throttlestop the multiplier goes back to standard,
What is the relation between the bios controlled undervolt and TBU in your experience? I do not understand if the bios i installed is supposed to be TBU enabled - my cpu single core boost is 27 but it is currently doing the standard 24 all core during stress tests at about 60w with bios undervolt set at 95/70/70 that i know is stable with this sample. Weird enough, it seems that if i disable the overclock feature in bios and boot without any undervolt i got stuck either on the windows loading circle or your logo…EDIT it seems that enabling/disabling overclock feature triggers something weird as it finally booted with oc feature disabled, but with the gpu in VESA, just like it has seen a new machine it had to wait a dozen seconds before activating the proper driver.