Well, file opens fine in FIT, so I’d assume it’s just following the guide to the letter…
Wrong version. The image you attached isn’t Intel ME 5! Use MEA.
I used fit 4 also same result. Can you tell me which version you used. In picture above i used v5 because i have used v4 with same error
I used TXE tools v4 and it works. I used the wrong version earlier. Now I can try to clean me region.
1 Like
I already tried building the image but the laptop still has black screen. I am wondering if the image that I build is faulty or not correct as I am still very new to all this. I am linking both my dump and the image which I built together. I am hoping someone can look into my files and confirm it to be correct me region cleaned file. Thanks
https://www.mediafire.com/file/96fia17ozcyhwr6/X133GV3.1_-_my_dump_me_clean.zip/file
I have no idea where to find stock bios. The laptop model is haier s2 and i cant find it
The guide is in the first posts of this thread- see chapter D4. CSME 11 - 15 & CSTXE 3 - 4
Follow the guide to the letter!
hello
i have Hp elitebook 830 G5 bios problemi ,i want to clean it but i can’t find the file 11.8.96.4657 in Repository?
Need clean me region for 13.0.65.2376
I have a Gigabyte H510M-H motherboard. I am unable to find a dumped ME driver that is not “Extracted” I looked every page in station-drivers (bear in mind I excluded LP ones) but I was unable to find one. Any help would be appreciated. I need Intel ME drivers to use FPT tool to get rid of the damn manufacturer-locked BIOS.
I need a clean dump for Series 15x (Serie 500) region.
Okay I’m giving this a shot. Will update you in a bit.
First one returned following: `Microsoft PnP Utility
Processing inf : heci.inf
Successfully installed the driver.
Driver package added successfully.
Published name : oem25.inf
Total attempted: 1
Number successfully imported: 1
Microsoft PnP Utility
Processing inf : DAL.inf
Successfully installed the driver.
Driver package added successfully.
Published name : oem26.inf
Total attempted: 1
Number successfully imported: 1
Microsoft PnP Utility
Processing inf : iclsClient.inf
Successfully installed the driver.
Driver package added successfully.
Published name : oem46.inf
Total attempted: 1
Number successfully imported: 1
Microsoft PnP Utility
Processing inf : MEWMIProv.inf
Successfully installed the driver.
Driver package added successfully.
Published name : oem27.inf
Total attempted: 1
Number successfully imported: 1`
Second one
check.cmd returns:
Intel (R) FW Update Version: 15.0.50.2636
Copyright (C) 2005 - 2024, Intel Corporation. All rights reserved.
Error 20: Cannot locate ME device.
Error 345: Display FW Version failed
Install.cmd returns:
Intel (R) FW Update Version: 15.0.50.2636
Copyright (C) 2005 - 2024, Intel Corporation. All rights reserved.
Error 20: Cannot locate ME device
I’m guessing I need to do clean dump steps to install second one -the me firmware-
Yes…seems you have an issue with your ME FW partition, so no windows OS driver will work or set it up correctly.
EDIT: FPT can only perform the reading/write operations if the bios FD is uncloked for acess, period… fpt is not an “ALL SAVIOR” without access to regions.
And this is the option for flashing a new update or a cleaned/re-initialized ME FW region or full bios region but with ME FW also cleaned/re-initialized.
Flashrom will only corrects the FW issue if a full SPI write is done, we can say its a “death” motherboard recover.
1 Like