Hello everybody 
Hope you’r doing well during thoses stranges time of lockdown.
I’m sorry to bother some professionnals of BIOS like you but i’m stuck on the reset of my Dell Precision T3610.
I’ve read tons of topic on this forum and other (this one is the best source of infos 
!) and here i am ;
–Problem :
Dell Precision T3610 stuck on boot with LED 1 2 and 3 orange. (same problem as @go2net but on a T5610 for him)
–Work done :
I have read the 2 chips composing the BIOS of this particular Dell BIOS architecture (same as T5610 seen on this topic : How to flash BIOS (8M+4M) using HW programmer on DELL Precision T5610 ?) by following thoses steps :
-Using Raspeberry, with flashrom to read the datas and put into 2 .bin files. (2-3 times to be sure of the correct reading)
-Using HxD to merge the 8Mb and 4Mb in one single file of 12Mb.
-Using MEA tool to check the resulting file and the “-dfpt” options to read the table.
-using PFSExtractor to get the .hdr file from the .EXE Dell BIOS installer (tried with first version A02 and last version A19)
-Using the Python 2.7 script to extract the data files from the .hdr file
-Comparing the Data from the Dell sources and my own dump of my faulty BIOS
-Replacing section (LOCL, WCOD, MDMV,…) tried different replacement to not lost some UUID data or particular infos (tried not replacing FOVD, MDES, FCRS that seems containing Microsoft licences or UUID i suppose)
-reflashing the 2 ship, and… always stuck on the boot with 3 LED 1 2 3 orange… 
If somebody could tell me where i’m wrong or even clean my faulty BIOS, i’ll be very thankfull and of course happy to save this computer 
Here are the dump of the 2 BIOS IC :
http://s000.tinyupload.com/?file_id=71060905336336689405
Many thanks in advance !
Solved yet?
Was there any traction on this?