[HELP] GA-X79-UD3 RAID NVMe

Hy guys, i recently buy >THIS< adapter for plug into >GA-X79-UD3 rev 1.1<.

With two of >THIS< M2 Nvme.

Problem’s the mainboard don’t boot if this card is conected on PCIe X16 gen3 ,with and without disk(M.2) ,with stok and modded bios(F20) as the same end . . . boot failure … loop of reboot

But on PCie X8 gen3, no boot problems but . . . only 1 disk as shows by sytem all options in bios turn in RAID . My system is Win10 build18363

I don’t know where to find the solutions for showing the second disk . . . help will be appreciated :slight_smile:

Thanks !