Hi all,
I need a second NVMe slot on an old Gigabyte board and I’m looking for real-world reports before I buy another adapter.
System:
- Gigabyte GA-Z68MX-UD2H-B3, BIOS U1H (latest, UEFI), i7-3770K, Windows 11
- GPU in the x16 slot
- OS drive: Samsung 950 Pro on a passive Dell DPWC300 in the x8 slot (works fine)
- Free slot: PCIe x4. A passive single-drive adapter (DPWC300 with a 970 Pro) negotiates a full x4 link there
Problem:
- A generic dual M.2 adapter with an ASM2812 switch chip gives no POST on this board. I tried it in the x8 and x4 slots, and with Storage Boot Option Control set to UEFI First, Legacy First and Legacy Only. Same result every time.
- The same ASM2812 card works well on two legacy-BIOS machines (Dell OptiPlex 780 and Acer Aspire Z5751): full Gen3 x4 link, around 1600 MB/s.
- A passive dual adapter only shows the first drive, as expected, since this board has no bifurcation option.
I don’t need to boot from the second drive. It would only be a data/programs drive, so the card just has to pass POST and enumerate the drive in Windows. I’d rather not use a modded BIOS.
Questions:
- Has anyone run an ASM2824-based card (e.g. StarTech PEX8M2E2, Glotrends PA40) on a Gigabyte Z68/Z77 board?
- Has anyone run a PLX PEX8747-based M.2 card on a Z68/Z77 board?
- Any idea why an ASM2812 would block POST on a UEFI board while working on legacy BIOS boards? Is this a known issue with ASMedia switches and these Gigabyte UEFI builds?
Thanks for any reports, positive or negative.
Edit by Fernando: Thread title shortened and customized