Good morning, a bit more detailed. I’m tryng to update an old lab server to Windows Server 2016 (1607), no problem to get the controller recognized by the installer with Windows Server 2012 R2 and Windows Server 2019 (1809). The 2019 would be OK, but the cpu is not supported by Hyper-V so I came back to 2016. The motherboard is a dual Opteron Gigabyte GA-3CESL-RH rev.1 (nVIDIA® nForce Professional 3600 MCP). I tryed many times to manually loading the drivers at the OS installation (the latest from Nvidia, SATARAID Driver (v11.1.0.43) WHQL W7 64bit. Finally I found your forum where I learnet the issue with Windows 10 1607 (Server 2016) and this family controller family. I hope I can get help with may server. Thanks
@dbcom :
Please read >this< post. If it should be useful for you, try it the same way.
Attached are the 64bit NVIDIA nForce SATARAID drivers v10.6.0.23 for orig scsidev mod+signed by me.
Don’t forget to set a “Restore Point” and to import the Win-RAID CA Certificate before starting the installation of the drivers.
Good luck!
64bit nForce SATARAID drivers v10.6.0.23 for orig scsidev mod+signed by Fernando.rar (138 KB)
Thanks, it worked! I been able to see the volume as secondary after booting from a non RAID disk with certificate + dirver installation. Any help about get it working at the Windows installation time?