@dsanke , to confirm, please check MEInfoWin.exe -verbose
Is that where you checked? If not, run that and check Measured + Verified Boot both enabled on left/FPF side at bottom of report. If both enabled there nothing you can do except replace PCH with one that is clean and does not have burned in signature to FPF fuses.
If they are disabled at left/FPF side of that report, then Boot Guard cannot be enabled properly (Thus can have no effect, even if enabled at BIOS or MW FW level). I have had user check this once before recently on this model, it was enabled like you said, but always best to check as sometimes it might not get setup correctly
https://www.bios-mods.com/forum/Thread-R…46011#pid146011
If you find it disabled at left/FPF side in MEInfo report, then some other reason for your bricked BIOS - if this is case please upload for me your original file and the one you edited
Please also show me image of output of >> MeInfoWin.exe -fwsts
1 Like