You’re welcome! And, thanks, try this - Program in BIOS with programmer, or flash ME via FPT, up to you but I’d program in due to the unlocked FD
http://s000.tinyupload.com/index.php?fil…750762157380291
ME, flash via >> FPTw.exe -me -f -MEOC.bin
Followed by >> FPTw.exe -greset
Then if it does not automatically reboot at -greset above, shut down system, remove power cable, press and hold case power on switch for 10-15 seconds, then let sit for one minute without power.
Then boot back to BIOS, load optimal defaults again, save and reboot back to BIOS and see if you can do anything new in ICC Area.
So, you can see Memory Freq Limit setting too, correct?
If this fails to boot, bricks, then let me know, I will make similar edit, but change profile selection back to softstrap instead of BIOS (I changed to BIOS + added Overclock profile and set OC profile to default)
I see ME read/write is NO in your FD, so without jumper I assume you cannot write ME FW with FPT. So, I unlocked FD for you also here, so now after you program this in, or jumper then flash in complete BIOS, you can then write ME with FPT without jumper