Hi
I have an omen oasis oc motherboard(z590) I am trying add support for 10th gen. Quick history I dropped my 11700k on the floor and killed it. So trying to put the spare 10700k in the board. But it just spin the cpu fan for 1 sec then stop when plug the power to the wall. Then press the power button same thing. No post no beep.
I have the ch341a flasher in hand. Read the bios from chip and I can see in MCE it only has the 11th gen microcode. I use the mmtool imported the 10th gen microcodes and flashed the bios back to the motherboard. Same thing cpu fan start stop. No post no beep. Anyone done this before? I don’t have a working 11th gen cpu anymore…