I would like to updae IME and shows me Error 8771: Invalid file. Can You write me what’s wrong ? Below I have coppied details:
c:\Intel ME System Tools v9.0\FWUpdate\Local-Win64>FWUpdLcl64 -fwver ME.BIN
Intel ® Firmware Update Utility Version: 9.0.22.1467
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.
FW Version: 9.0.31.1487
c:\Intel ME System Tools v9.0\FWUpdate\Local-Win64>FWUpdLcl64 -save OLD.BIN
Intel ® Firmware Update Utility Version: 9.0.22.1467
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.
STATUS: restore point operation success.
c:\Intel ME System Tools v9.0\FWUpdate\Local-Win64>FWUpdLcl64 -f ME.BIN
Intel ® Firmware Update Utility Version: 9.0.22.1467
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.
Communication Mode: MEI
Checking firmware parameters…
Warning: Do not exit the process or power off the machine before the firmware update process ends.
Error 8771: Invalid File
c:\Intel ME System Tools v9.0\FWUpdate\Local-Win64>
and :
C:\Intel ME System Tools v9.0\MEInfo\Windows64>meinfowin64
Intel® MEInfo Version: 9.0.22.1467
Copyright© 2005 - 2013, Intel Corporation. All rights reserved.
Intel® Manageability and Security Application code versions:
BIOS Version: Version 1.12
MEBx Version: 9.0.0.0025
Gbe Version: 1.3
VendorID: 8086
PCH Version: 4
FW Version: 9.0.22.1467 H
LMS Version: 11.0.6.1194
MEI Driver Version: 11.0.5.1189
FW Capabilities: 0x0930196C
Intel® Small Business Technology - PRESENT/ENABLED
Intel® Anti-Theft Technology - PRESENT/ENABLED
Intel® Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED
Intel® Dynamic Application Loader - PRESENT/ENABLED
TLS: Enabled
Last ME reset reason: Power up
Local FWUpdate: Enabled
BIOS Config Lock: Enabled
GbE Config Lock: Enabled
Host Read Access to ME: Disabled
Host Write Access to ME: Disabled
SPI Flash ID #1: EF4017
SPI Flash ID VSCC #1: 20252025
SPI Flash ID #2: EF4016
SPI Flash ID VSCC #2: 20252025
SPI Flash BIOS VSCC: 2025
BIOS boot State: Post Boot
OEM Id: 00000000-0000-0000-0000-000000000000
Capability Licensing Service: Enabled
OEM Tag: 0x00000000
Slot 1 Board Manufacturer: Unused
Slot 2 System Assembler: Unused
Slot 3 Reserved: Unused
M3 Autotest: Disabled
Localized Language: English
Independent Firmware Recovery: Disabled
C:\Intel ME System Tools v9.0\MEInfo\Windows64>
Regards
Could be various things, all OS related. Maybe it can’t find the file, maybe it doesn’t like the extension, maybe the file is not proper etc. Download the latest firmware from the first post and try the DOS/EFI version of FWUpdate to eliminate any OS-related problems.
Do I understand well that FW Version: 9.0.31.1487 is the latest firmware ?
Regards
As far as version is concerned, yes. But you need the same SKU as well. If your currently have 1.5MB SKU then get that firmware, otherwise the 5MB variant. You can use ME Analyzer with that "OLD.BIN" file you saved to quickly check.
it shows me SKU 5, so I should use which version ? Will this update change something better for my machine ? I use this machine personal and I have installed MEI 1,5 for personal.
Firmware: Intel ME
Version: 9.0.22.1467
Release: Production
Type: Update
SKU: 5MB
VCN: 3
PV: Yes
Date: 09/09/2013
Latest: No
I have installed SKU 5 MB and looks O.K>
I would like to do MEManuf Test Passed but after this my machine reboot and no shows from test nothing 
Someting wrong that I can’t do MEM test ?
MEManuf does not require any reboot, just run it via a command line and it should tell you right away if "Operation Passed".
yes but I ran this via command line and this cause reboot my system without any information.
Reboot? Does not make sense. Are you sure it’s not a crash, BSOD or something? What command are you running? What do you see at MEInfo tool instead?
cd c:\Intel ME System Tools v9.0\MeManuf\Windows64
memanufwin64 enter
all as Admin I use this command. maybe it was crash, I don’t know - normalny after this reboot my system.
Try the DOS or EFI version of MEManuf because I suspect your problem is OS/computer specific.
OK but how Can I try DOS or EFI ?
Search google on how to create a bootable usb drive and copy the tool you need there. Same for bootable EFI.
i tried everything and the same. I have Windows 10 Pro with secure boot. maybe here is the problem.
You can try disabling SecureBoot temporarily but I don’t think it’s related. What system is that exactly?
Windows 10 Pro 64 bit .