Where does it say that? Read the explanation given here, it should make things clear.
MEI Driver v2047.100.0.1039 (Windows 10 >= 1709)
CSME 11.8 Corporate PCH-LP C NPDM v11.8.82.3838
CSME 11.8 Corporate PCH-LP C YPDM v11.8.82.3838
FWUpdate & MEInfo 11.8.82.3838.rar (1.39 MB)
Intel CSME version detection tool
Intel’s management engine vulnerability detection tool
InSpectre
Meltdown and Spectre vulnerability detection tool
CSME 14.0 Corporate H A v14.0.47.1558
CSME 14.0 Corporate LP B,A v14.0.47.1558
@ onuracengiz:
That is a BIOS option, not related to this thread.
Is it possible to upgrade a ME 8.1.x firmware to a later version, i.e. >8.1.x such as 9.x and so?
This driver removed the software components for me (Z370 motherboard) and WU updated the Generic entries them with outdated Intel drivers, but just 2 out of the 3 software comps.
Gonna reinstall the older driver.
MEI Drivers & Software v2101.15.0.2080 DCH (Windows 10 >= 1709)
CSME 14.0 Consumer LP B,A v14.0.47.1558
This driver removed the software components for me (Z370 motherboard) and WU updated the Generic entries them with outdated Intel drivers, but just 2 out of the 3 software comps.
Gonna reinstall the older driver.
try the new 2101.15.0.2080 version if something similar happens let it uninstall (odd though,it should not do that),cut the connection,use have disk method.if still the new driver has not been accepted this possibly means its the end of the road for your device which translates to you wont need to worry about the updates anymore,thats the lastest version (previous one) possible for your device
This driver removed the software components for me (Z370 motherboard) and WU updated the Generic entries them with outdated Intel drivers, but just 2 out of the 3 software comps.
Gonna reinstall the older driver.
try the new 2101.15.0.2080 version if something similar happens let it uninstall (odd though,it should not do that),cut the connection,use have disk method.if still the new driver has not been accepted this possibly means its the end of the road for your device which translates to you wont need to worry about the updates anymore,thats the lastest version (previous one) possible for your device
This last driver worked normally like all the others. The previous one only updated Intel ME, without the software components.
Back to normal now.
Good to hear
CSME 15.0 Consumer H A v15.0.21.1549
PMC TGP H B v150.2.10.1010
PHY P TGP v12.14.211.2011
Hello, i have a problem :
i have a desktop pc with a motherboard Asus Z97-A . And with Dumo software, it informs me that a major update is available since several years ,but i never managed to install it 
:
- Intel Management Engine Interface 2040.100.0.1029
On page 1 of this topic, in A1 i tried to install the " Intel MEI Drivers Software v2101.15.0.2080 DCH " or " MEI Software v2044.15.0.1951 MSI "
but when i run the setup, windows stops it and replies :
" this platform is not supported "
And i also downloaded the driver only on page 1 of this topic in A2 : " MEI Driver v2040.100.0.1029 (Windows 8, 10 <= 1703) "
but when i go to my device manager > system peripherals > Intel Management Engine Interface > right click mouse > properties > driver > update driver > browse my computer for driver software
and that i go to the place where i downloaded the IMEI :
Windows does not want to install the IMEI it always tells me that i already have the most recent driver installed 
while this is wrong of course, i currently have the IMEI version :
11.7.0.1057 old from 19/11/2017
sorry for my average english, i’m french .Do you know a solution? thank you in advance for your help
No its not wrong at all, DUMO relies on general information…not specific HW ID.
If u use for ex: Driver Easy it will point u the the version u got now and last one for Z97, ME9 as the 11.7.0.1057.
Its pointed in point A related to older chipsets 7 8 9
Acer vn7-792g
Intel 100series/c230 chipset
ME firmware successfully updated to 11.8.82.3838
ME software successfully updated to 2047.100.0.1039 (Intel MEI v2101.15.0.2080)
Tools used;
CSME Firmware v11.8.82.3838 (CON H DA)
Intel CSME System Tools v11 r37
ME_Analyzer_v1.185.0_r227
Intel CSME Version Detection Tool
CSME 13.0 Consumer LP D v13.0.40.1738
thank you. Although novice to firmwares, while you are experts here,
…it seems bizarre to me, it’s badly done
because Dumo software for years had found me a dozen updates to do .And i had done them all and they were all successful !
dumo detects my configuration this is the one i prefer all other drivers softwares because it is extremely precise,this is the one who found me the most drivers to update
that’s why i have trouble understanding why he would make a mistake by informing me that this driver : MEI Driver v2040.100.0.1029 is available for my motherboard ? 
Ur problem is not related to ME Firmware 9 period. Ur question is related to the driver and if u check latest versions presented (Modern ones) u will not find ur HW ID in the INF of the driver.
Wot u need is in section D1 or D4