Intel (CS) Management Engine: Drivers, Firmware and Tools for (CS)ME 16+

for MEA db

16.1.25.2128_CON_H_A_PRD_EXTR_1DBC4A05
16.1.27.2192_CON_LP_A_PRD_EXTR_553950DC
PCHC:
ADP_16.0.0.1003_PRD_5FC3F0C9.bin
ADP_16.1.0.1012_PRE_6EDCC20C.bin
ADP_16.1.0.1014_PRE_7FFC25C9.bin
PMC:
ADP_160.1.00.1023_LP_A_PRE_C1821439.bin
ADP_160.1.00.1027_LP_A_PRE_43DF74F8.bin
ADP_160.1.00.1028_LP_A_PRD_18999ADF.bin
ADP_160.1.00.1028_LP_A_PRE_FE79D0B8.bin
ADP_160.1.00.1029_LP_A_PRE_F6C76A9D.bin
ADP_160.2.00.1026_H_A_PRD_ACAC65D6.bin
ADP_160.2.00.1034_H_A_PRE_01C3A22B.bin
ADP_160.2.00.1039_H_A_PRE_049D703D.bin
PHY:
ADP_N_14.210.504.9204_PRE_51E42FB3.bin
ADP_N_14.526.505.8251_PRE_D79AE489.bin
ADP_N_14.529.507.8255_PRE_EE6D7210.bin
ADP_S_13.1.2.1000_PRD_418C2A26.bin

2 Likes


How can I update to the latest ME firmware

read the first post and follow the tutorial or download the flash-ready fw you desire to update to (some people bake it and release it on station-drivers for example) and just flash that.

Help ME firmware, 16.0.10.1473

Alder Lake & Raptor Lake ME FW v16 update

New PHY ADP N firmware version 13.61.211.7254, since MEA r331

2 Likes

A post was merged into an existing topic: How to extract contents of this Dell BIOS package?

2 posts were merged into an existing topic: Intel (Converged Security) Management Engine: Drivers, Firmware and Tools (2-15)

A post was merged into an existing topic: [Guide] Clean Dumped Intel Engine (CS)ME/(CS)TXE Regions with Data Initialization

hello please other link

CSE ME 16.1.30.2255 Consumer H
PHY 13.62.211.7255 Production, Engineering ADP N

ME_Intel_v16.1.30.2255.zip (2.2 MB)

https://www.elevenforum.com/t/firmware-intel-me-h610-b660-h670-z690-b760-h770-z790.11362/

2 Likes

CSE ME 16.10.5.1583
PMC 161.2.00.1040 Production Independent H A ADP
PCHC 16.10.0.1012 Production Independent ADP
PHY 13.0.1.7083 Production, Engineering Independent S ADP

1610.zip (3.6 MB)

(Not sure what this is, but I don’t think it was mentioned yet?)

1 Like

This is 16.10 firmware from Intel W790 Xeon Sapphire Rapids plaform (LGA 4677).
As 16.50 firmware that I posted earlier, it is not supported by MEA and will not be added to its database, as Plutomaniac said. So i think there’s no need to post them.

I don’t have that archive, it was already added to DB, no chance i’ll post it again, I doubt you need a bunch of preproduction firmwares. If you need something specific from that list, just ask exactly what you need.

1 Like

True, there won’t be MEA support for these and also not included in the DB. However, I believe that it’s good to be posted/attached/kept somewhere in case someone wants to look/use at these firmware. Personally, I try to keep most of these new binaries in bulk (w/o any processing), just in case.

New on ST, Intel Management Engine (ME) Firmware Version 16.1.30.2264 (S&H) 1.5Mo

3 Likes

16.1.25.2091_COR_LP_A_PRD_EXTR.zip (5.2 MB)

1 Like

Good afternoon everyone!
Please help me find CSME System Tools 16.0.15.1735.
I will be very grateful.

hi .
my old bios backup gives an error on me analyzer.
“Error: Detected CSE Extension 0x16 with wrong Partition Hash at FTPR > FTPR.man!”
cs me version is 16.0.15.1662 anyone have you got , can you share?

Hello,

I am using a CLEVO NP70PNJ (NP5x_NP6x_NP7xPNK_PNH_PNJ).

The latest BIOS I found is version 12 with the following details:

BIOS Version: 1.07.12
KBC/EC Version: 1.07.07
ME FW Version: 16.1.25.1865

The problem is that even this latest ME firmware is vulnerable (CSME-Version-Detection-Tool). :neutral_face:

CLEVO, of course, does not respond to any messages and is not very responsive. :nail_care:

Thanks to a user’s sharing on this forum, I found a more recent ME/FW update on Station-drivers.

I’m just very concerned about bricking a brand new PC, and I would like confirmation that upgrading from:

ME version 16.1.25.1865 to ME version 16.1.27.2192 as shown in the image below won’t cause any issues? (the difference between in yellow)

I’m asking because, based on the message at the beginning of this thread, it’s dangerous to change the ‘Version Control Number’ or, worse, to switch the PCHC from 16.0.x to 16.1.x , differente total bits size:thinking:

And, most importantly, even if I make a backup with ‘fptw64.exe -ME -D actualFWME.bin’ , if I brick it with a bad flash, I won’t be able to flash back the backup since the PC won’t boot anymore. :scream:

In summary, I need a specialist :robot: to confirm if it’s safe to flash the image above.

Thanks !

Edit: I see that if I perform a backup, I have “Initialized” in the File System State, which would be normal because it comes from an initialized system. Therefore, it is logical that the file to be flashed should be in File System State = “Configured” I suppose because DATA has been cleaned up. Note that all this speculations are based on what I understood from the second paragraph “A. About Engine Regions & Configuration” from the first post in this thread.

Vulnerable to what? Millions of people use computers with outdated ME firmware and who cares.

It’s unlikely that you’ll brick it with an update, but there’s always a chance that something won’t work correctly. It is only safe to use updates provided by your laptop manufacturer itself. If you are so concerned about ME vulnerabilities, maybe you should use a laptop with disabled ME.