Intel RST/RSTe Drivers (latest: v20.2.1.1016/ v9.0.0.2062)

plutomaniac · January 11, 2015, 12:54am

Right yes, X99 must be using the RSTe ones originally. Or 13.1 which is the release that Asus is giving by default either way. Sorry, small mistake.

andressergio · January 11, 2015, 3:02am

thanks Fernando !!! i think that is the version that brings the DVD from ASUS

/**********ASUS SITE

Version 13.1.0.1058

Description Intel AHCI/RAID Driver Path for Windows Win7 32bit & Win7 64bit & Win8 32bit & Win8 64bit & Win8.1 32bit & Win8.1 64bit.
Intel Rapid Storage Technology Driver software V13.1.0.1058 for Windows Win7 64bit & Win8 64bit & Win8.1 64bit—(WHQL).
Intel Rapid Storage Technology Driver software V13.1.0.1058 for Windows Win7 32bit & Win8 32bit & Win8.1 32bit—(WHQL).

/**********ASUS SITE

btw what’s your opion on W7x64 SP1 vs W8.1x64 in overall performance ?

Cheers !!!
Sergio

andressergio · January 11, 2015, 3:03am

no worries bro thans for your help !!!

Kind Regards
Sergio

Fernando · January 11, 2015, 9:38am

Yes, the v13.1.0.1058 is the only Intel RST driver, which natively supports X99 chipsets in AHCI mode.
Nevertheless it would be possible for you to get the RST AHCI drivers v13.2.4.1000 or v13.5.0.1056 installed, but you have to
a) take the variants, which had been modded by me and
b) force the installation by using the "Have Disk" button ( if you are running Win8 or Win10, you have additionally to disable the "Driver Signature Enforcement" before).

For my Z77 and Z97 systems Win8.1 seems to be better performant than Win7.

andressergio · January 11, 2015, 10:53am

Thanks Fernnado that worked as a charm very nice now

Yes i will try again, but i hate when i got the install from USB and ask me for GPT partition, GPT is used for more tan 2TB disks…that drove me nuts…and also i don’t like the menu would be awesome if it was normal

Cheers bro !!! Visit my page i’m re directing you to ALL Latin America !!!

Please be ALL Wellcome to my page
https://www.facebook.com/AndressergioUruguayOC

You can freely post there your rigs, tests whatever you want i will re publish you and all the bros here, you will get more audience and donations
My Comunity is non profit so there’s problem

We need to help each other on this selfish world bro

Thanks again
Kind Regards
Sergio

EDIT by Fernando: Unneeded fully quoted text removed (to save space)

plutomaniac · January 11, 2015, 12:28pm

I don’t think such advertisement is allowed

Fernando · January 11, 2015, 12:58pm

@ andressergio:

Please remove the link to your Facebook page and the related promotion text from your last post.
It is no problem, if you put your Facebook web address into your signature.

You are welcome!
Question: What is working like a charme? Which Intel AHCI driver are you running now?

Greetings from Germany
Fernando

plutomaniac · January 11, 2015, 1:14pm

Regarding RST system support, I think this clarifies some things. Basically v13 is for 8-series, 9-series & X79 from 7-series. The older v12 supported everything from 5-series & up to 8-series.

RST_13.0_SysReq.png

RST_12.7_SysReq.png

So for 7-series (except X79) v13.x is not recommended no matter if the v13.0 and v13.1 drivers were supported at the Windows .inf files. For 6-series, v12.x is the latest.

(Images from v13.0 & v12.7 packages respectively)

sinders · January 11, 2015, 8:19pm

Hi guys. Within Intel® Rapid Storage Technology software there is a setting to set cache mode for better performance.

I see these options below available to me

1. Write through

2. Read Only

3. Off

What should I set this option on for best SSD RAID 0 performance?

Also should I disable the write-cache buffer flushing setting or leave it enabled for best performance?

Thank you in advance for the feedback.

Fernando · January 11, 2015, 8:40pm

@ sinders:

You can find the answers to all your questions within the start post of >this< thread.

sinders · January 11, 2015, 9:33pm

Thanks very much Fernando for pointing me in the right direction.

Fernando · January 11, 2015, 9:37pm

You are welcome.
By the way: I just have updated my advices for RAID0 users.

sinders · January 11, 2015, 9:54pm

I have just done as your guide suggests and have got a performance boost from it.

Thanks again Fernando.

kevindd992002 · January 12, 2015, 7:07pm

I’m assuming that if I want pure performance, I should disable “link power management”, right?

Fernando · January 12, 2015, 9:40pm

I have not missed your question, but you obviously have missed reading. The answer to your question is >here<.

kevindd992002 · January 12, 2015, 9:44pm

My bad, I definitely missed that.

flashmozzg · January 14, 2015, 10:52pm

I have a problem. I explained it here: https://communities.intel.com/message/273518
Can somebody help me?

Fernando · January 14, 2015, 11:10pm

@ flashmozzg:

Welcome at Win-RAID Forum!
Although the discussion at Intel Communities is rather confusing for me, I will try to help you.
This is what I recommend to do first:
1. Open the "IDE ATA/ATAPI Controllers" section of the Device Manager. Which Controller is listed? Please post the name or - even better - attach a screenshot of the Device Manager (hit Alt+Print, run MS Paint, then hit "Paste", "Crop" and save it as .jpg or .png file).
2. Enter the Control Panel > "Programs" >"Add/Remove Programs" and look, if the program "Intel(R) Rapid Storage Technology" is listed.

Regards
Dieter (alias Fernando)

flashmozzg · January 14, 2015, 11:22pm

Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller (it’s the only one ata/atapi controller listed)
2. Where is no such program listed. That’s one of the problems I have. And after buggy installation of drivers from this thread (13.5) it’s not even working.

I have (from dxdiag)

1
2
3

     Name: Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller
Device ID: PCI\VEN_8086&DEV_8C02&SUBSYS_B0051458&REV_04\3&11583659&0&FA
   Driver: G:\WINDOWS\system32\DRIVERS\iaStorA.sys, 12.00.0000.1082 (English), 1/31/2013 14:20:10, 652784 bytes

The reason I decided to update in the first place is because trimcheck said that trim is not working on my drives. But after the update it kept stalling my crucial m500 ssd with 100% activity (could be related to buggy power save/state/lpm features) so I used fallback to previous drivers (also, the rst program still was the old version). After that I downloaded latest driver from mobo's support page and tried to install it (it came with installer). It failed at first. But at the same time it switched my driver version from working but "trimless" 12 to 13.5 from this thread I installed before with no option to revert. So I had to restore from backup but after that tsy ui is not working too (it is in tray but it never opens, just creates "parasite" processes).

Fernando · January 14, 2015, 11:35pm

@ flashmozzg:

Thanks for your answers.
Unfortunately you haven’t mentioned anywhere the OS you are running.

If it should be Win7 or up, please do the following:
1. Right click onto the Intel SATA AHCI Controller, which is listed within the “IDE ATA/ATAPI Controllers” section of the Device Manager.
2. Choose “Update Driver Software” > “Browse my Computer…” > “Let me pick…” and check the option “Show compatible Devices”.
3. If you see a device named “Standard AHCI Controller” or “Standard AHCI 1.0 Serial ATA Controller”, choose it, click “OK” and reboot.
4. After the reboot your Intel SATA AHCI Controller will not use anymore any Intel RST driver, but the generic MS AHCI driver.

Please give us a feedback.