as described:
i want to backup my firmware for:
Modelltype: ST31500341AS ( Seagate )
Firmware installed and untouched: CC1H
ATA8-ACS version 4
SATA Rev 2.6
Serialnumber unshown * <<
what i want to do with that tool:
Backup and Reset to at s Original State.
why ?
it’s on very bad condition !
what else: Hard Drive Sector Refurbishing / Calibration e.g more
maybe this goes to the System Performance Forum Section, dno may you push it there.
always ready for advises and following thread links.
thanks.