Hi, Asus X750JB
North Bridge Intel Haswell.MB IMC
South Bridge Intel Lynx Point HM86
intel Shark Bay-MB
if I use the FITC vers Intel ME System Tools v9.1 r4 return error: invalid value for smbus Address. setting to 0x28-NXP
if I use the FITC vers Flash Image Tool 184.108.40.2068_Support chipset CPU Haswell return error: error loading firmware version 220.127.116.115 this firmware does not support lynxpoint-LP platform
Someone can help me to find the correct fitc version ?
After some research NFC - Near Field Communication i is "a fast, intuitive technology that lets you interact securely with the world around you with a simple touch. … " but under ME / configuration / Intel (NFC) Capibilities → Near Field Communication Enabled → False
I presume that if it’s not enabled the error don’t affect the build process, right ?
So I can use FITC ver v9.1 r4 with Lynx Point ?
You must use ME System Tools v9.1 for your system. You can ignore that error and let FITC set it to the default value. Make sure that you don’t see any yellow (changed from defaults) lines which say “Unknown” at all Engine configuration menus.