Modded Intel AHCI and RAID Drivers (digitally signed)

Post:

I recently ran into an issue when preparing a Windows 10 USB for installation on a system, that needed AHCI/RAID drivers with Win-RAID certificate, with no image or option to first install Win-RAID cert


Problem

  1. Some Windows 10 ISO install.wim files exceed 4GB and cannot be copied to a FAT32 USB (required for UEFI boot).

  2. AHCI/RAID drivers fail to install during setup unless the Win-RAID CA certificate is present.


Solution Steps

1. Split the oversized WIM file

Open PowerShell as Administrator. Create a temporary folder for split WIM files:

mkdir C:\ISOTemp

Split the WIM into smaller SWM files (~3.8GB each):

Dism /Split-Image /ImageFile:D:\sources\install.wim /SWMFile:C:\ISOTemp\install.swm /FileSize:3800


2. Prepare the USB

  • Format the USB as FAT32 for UEFI boot.

  • Copy all Windows installation files to the USB:

robocopy "C:\Users\YourUser\Downloads\Windows_10_20H2.3" "D:\" /E /COPYALL /R:2 /W:2

  • Replace the original install.wim with the split SWM files:
Copy-Item C:\ISOTemp\*.swm D:\sources\


3. Inject Win-RAID CA Certificate

Copy the certificate into the mounted offline Windows image:

copy "D:\Win-RAID CA Certificate\Win-RAID CA.cer" "C:\Mount\Windows\System32\Win-RAID CA.cer"

Load the offline registry hive and add the certificate:

reg load HKLM\Offline "C:\Mount\Windows\System32\config\SOFTWARE"
certutil -addstore -f -enterprise -user "Root" "C:\Mount\Windows\System32\Win-RAID CA.cer"
reg unload HKLM\Offline


4. Inject AHCI/RAID Drivers

Add the drivers to the offline image using DISM:

dism /Image:C:\Mount /Add-Driver /Driver:"D:\Drivers\AHCI\x64" /Recurse


5. Unmount the image

Commit the changes and unmount:

dism /Unmount-Wim /MountDir:C:\Mount /Commit


6. Boot Your USB

  • The USB is now FAT32, UEFI-bootable, and includes the necessary drivers and certificate.

  • Windows setup will correctly recognize AHCI/RAID hardware

Thank you very much Fernando

2 Likes