MSI GF65 Thin 10ue missimg (disabled) FW ME Version 0.0.0.0

Special Topics Intel Management Engine
1

I updated the laptop BIOS to the latest version E16W2IMS.105, and some strange problems occurred.

  1. The ME FW version in the BIOS has changed to “0.0.0.0”. Before the update, the ME FW version in the BIOS was displayed normally.
    2.The Intel Management Engine Interface in Device Manager disappeared.
  2. The MEI driver downloaded from the motherboard website cannot be installed: “This platform is not supported” is displayed.
  3. The computer POST phase needs to become very slow (previous BIOS only had a few seconds in the POST phase)
  4. TPM device not present.
    Except for the above problems, the computer is working normally. I googled and found that all the problems are caused by ME FW in BIOS.
    I programmed different versions of bios (with cleaning ME region) by programmer and through BIOS flash, changed bios chip - didn’t help at all.

Thank you for any help.

2

ME Firmware partition corrupted, needs fix and full programming to the SPI IC.
It needs a programmer, only option besides is using Intel FPT tool v14 but it needs FDO unlocked, to write.
[Guide] Clean Dumped Intel Engine (CS)ME/(CS)TXE Regions with Data Initialization - Special Topics / Intel Management Engine - Win-Raid Forum

3

If you already flashed ‘different versions’ of a firmware by programmer which had a freshly configured ‘clean’ ME region and it didn’t help, this is probably not firmware related.