[Problem] Need Clevo P650SE 16MB BIOS .bin file

Hi, I need BIOS bin file for

Clevo P1504X (2015, Broadwell gen 5).

Chip: GigaDevice GD25Q128 16MB

Maguay MyWay P1504X - Romanian brand (Clevo barebone)

BIOS Region is completely erased (all FF)

Descriptor and ME are intact.

Full 16MB dump or just 4MB BIOS region both accepted.

Thank you!


Edit by Fernando: Thread moved into the “BIOS Problems” Category and title customized

You need to supply mb model ID/rev.

@MeatWar thank you again for your quick response.

I examined the tags on MB. I am sorry I was wrong with the model.

Correct model : Clevo P650SE

MB P/N: 6-77-P650SE0A-N03

CPU: INTEL CORE i7-4720HQ (HASWELL)

PRODUCT DATE: 2015.02.23

Chip: GigaDevice GD25Q128

Need full 16MB BIOS dump ( .bin file)

I was looking on recommended Palkeo Clevo Mirror and I found both BIOS and EC files but only executable updates. Could you direct me to a link containing 16MB BIOS .bin file, please?

THANK YOU!

Yeah…i thought so…
Now share the full corrupted reading of the IC and the additional files.
New users can’t, yet attach here files, share a link from somewhere else.

Hi, I sent a link with the corrupt BIOS acquired with NeoProgrammer through CH341A interface. I do not know what the additional files you are requesting also. Thank you for your time!

Now shows us that GD25Q128 on the board itself, being this the referred IC dump you read with the programmer…

Dump reading state…beyond possibility to work with… not going to lose my time with HEX editor.

“Multiple (8) Intel Flash Descriptors detected!”

This is just multiple ME regions merged… if this is a dump reading, it’s not the original dump and this is just bxxxxxxx done by you… 16Mb…sure

Here’s bios_region and me_region version 1.03.09 and 1.05.01

Good luck

@MeatWar thank you very much!

I downloaded the files. I can not wait to process them and insert them into the BIOS chip. I understood I will introduce them into BIOS region, and ME region. Is there anything I must be aware of?

I will keep myou informed. Thanks a lot!

I’m afraid you will not succeed… too much contradictory info provided against files structure, mboard schematics, IC, of this model…
You dont have the knowledge or mistaken/omitted info…

@MeatWar Unfortunately, this is the original dump I read with CH341A interface on GD25Q128 chip with NeoProgrammer reader.

I am new to this kind of procedures, so I consulted Claude and ChatGPT. So I reached to examine the file with UEFITools and to make an asessment to the regions health. Since UEFI Tool A73, the latest version, could not open the file, I tried with A68 version and found this image. So best of all I would write the wholoe BIOS .bin file. If it is nor

…If it is not possible, I must write the BIOS region only , with base 200000h, offset 200000h and full size 400000h (4194304 b)

I am sure I will succeed with your help, with Claude and GPT help. What could happen worst? Try again! And again… Nobody is born wiseman.:slightly_smiling_face: so I need that .bin file. Or BIOS,-16M or BIOS region only -4M. In the zip archive you directed me to download, Clevo P65xSE B0501 WORKING BIOS there is a file P65SE_05.01, 4194304 b. Is this the .bin file I need for BIOS region?

@MeatWar, thank you again.

Please, understand this is not about a laptop. This is about Man vs Machine! With your help, I will defeat the Beast!! Then, you could call me @FlowerPeace :victory_hand:

Yeah… thought so, i will ask you for the last time, take a snapshot of the location/ic you attached the programmer, the one that gave you the 16Mb data dump.