Hi guys,
A few details about my system :
MB: Gigabyte GA-X58A-UD3R Rev
CPU: i7 960
RAM: 12GB
Graphics card: Gigabyte GTX780
Samsung SSD 850 Evo (OS drive)
4 x Seagate 3TB (for Raid)
I’ve recently upgraded some HDD’s in my PC and I’m struggling to get the Raid working. It’s showing in my BIOS, but nothing in the OS. If I try using Intel Rapid Storage Technology it says "The OROM version is not compatible with volumes greater than or equal to two terabytes"
I’m running Bios version FH which should allow this size of drive, any help woukd be gratefully appreciated.
Thanks
@Magical_Trevor :
Welcome at Win-RAID Forum!
I suspect, that your problem is caused by an Intel RAID ROM version, which doesn’t support >2 TB sized RAID volumes. The only possible solution is to update the Intel RAID ROM version of your mainboard BIOS to v10.5.x.xxxx or higher (preferable v11.2.0.1527).
That is why I have moved the thread into the "BIOS Modules" Sub-Forum.
Really nothing? The RAID array should be detected and shown by the OS, but not with the correct size.
Please post a sceenshot of the Disk Management.
Regards
Dieter (alias Fernando)