[REQUEST] Asus P8P67 ME in bios show n/a, need clean image

Special Topics Intel Management Engine
1

At start sorry for my bad english. When i was trying to update bios something went wrong and motherboard was not starting. I baught ch341a programmed bios but after this me is showing n/a. How can i repair this? Asus p8p67 and i5 2500k

IMG_0189
IMG_01892016×1512 1.16 MB

2

https://winraid.level1techs.com/t1658f39-Guide-Clean-Dumped-Intel-Engine-CS-ME-CS-TXE-Regions-with-Data-Initialization.html

ME FW 8.x

EDIT: This is an operation done on the user side and takes some time…yours, not mine.
Read and learn.

3

Its very complicated for me. Im young and i have Basic knowledge. I hope you understand me

4

Can you make special image for me Please. It will be very helpful

5

What kind of firmware image did you flash?

6

The newest bios version downloaded from Asus site

7

Those firmwares should have a properly configured ‘clean’ ME region. If flashed properly the linked procedure will not have an affect.

You could try to run MEInfo and post the output.

8

Guys i noticed that my motherboard has problem with me updating from version 7 to 8

9

…and the problem is the same or updating to latest FW version?

10

I had problem with updating from 2303 to 3207 bios version because with 3207 version also me is updating from 7 to 8

11

Yes we know that latest bios upgrades also the ME, ill ask again is the ME n/a issue solved now or before the update or did update anyway thinking that would be fixed? Cause upgrading bios wont ever solve that.

12

I programmed bios with version that has older me but now i cant install ivy bridge cpu because when im trying update bios im getting image integrity check failed

13

I see in your initial post a capture screen of bios 3602 with ME n/a, this bios release has the ME FW v8

Now after this your telling me that you programmed an older bios (2303, ME FW v7) with an SPI programmer?
Show me now the same screen capture.

Sir… do a full SPI programming with a CH341a to latest bios version 3207 and problem solved to all that mess or do a full FPT flash, board info you can take from a backup.
Or boot a USB with AMI AFUDOS and use syntax -ME

14

Thanks, you just didnt understood me. Firstly i flashed 3602 but when i noticed that me is n/a i flashed 2303 to get working board. Now i will flash 3207 just like you said