[Request] Gigabyte GA-Z97X-Gaming 3

Hi all,

I am trying to update my bios - at least with the microcode updates, but I will need a bit of your help. Going through the forum there are mentions that UBU messed up offsets and placements of microcode into BIOS file. How to check that. UBU has done the update via the MMTOOL as it was looking for it.

Could the VBIOS be taken from the Gaming 7 board or do I also need to transfer all of the settings?

When starting UBU there is a section: EFI NVMe Driver present. Should I also add the NVMe part or is the following enough.

I am enclosing both files in case someone has enough time to look at them :slight_smile:

Thanks and stay healthy!

Z97XG3.zip (5.55 MB)

mod_bios.zip (5.55 MB)