[Request] GIGABYTE Z77X-D3H Bios with NVMe support

[jiko80]

im just beginner in BIOS… correct me if im wrong…

@Fernando

It is no problem to get a PCIe or M.2 connected NVMe SSD working with any Intel Chipset system from 6-Series up without modifying the mainboard BIOS, if
a) the NVMe SSD will be used for the storage of data (as drive D:, E: etc.) and
b) an appropriate NVMe driver is present within the Operating System (either natively or loaded/integrated),
but the usage of such SSD as bootable system drive C: (incl. the boot sector) usually requires a special mainboard BIOS EFI module, which has to be loaded while booting.
Note: Some NVMe SSDs like Samsung’s 950 Pro SSD are natively bootable in LEGACY mode (CSM and loading of Option ROMs has to be enabled within the BIOS), because their Controller chip contains its own NVMe supporting Option ROM module.
These are the best pre-conditions for a successful implementation and configuration of an NVMe SSD as bootable system drive:
1. The desired OS should be Win10 (due to its native NVMe support).
2. The mainboard BIOS should offer the required UEFI boot settings.
3. It should be possible to get a modded BIOS successfully flashed into the system’s BIOS chip.
4. The on-board Intel SATA Controller should not been set to "RAID" mode within the BIOS.