Hello,
I have a Gigabyte B250M-DS3H Motherboard. I’m looking for a way to overclock on it, like turn the Clock Ratio Higher then allowed. I have a K series Processor.
Is there a way to achieve this through modding the UEFI/BIOS? Is anyone able to do this for me, I’m not familiar with the process and rather not brick my motherboard.
GA-B250M-DS3H (rev. 1.0) support
latest bios version is F9 (2018/05/07)
updated bios
overclocking beyond its capabilities is risky if not best case can shorten its life expectancies.that being said,i have updated your modules,microcodes and tweaked the settings.i recommended keeping the original bios file close,just in case and clean installing Win10.prepare accordingly
Updating management engine firmware also recommended,
Intel (Converged Security) Management Engine: Drivers, Firmware and Tools
As rule of thumb,keep your OS,apps,bios and drivers updated
Hello, thanks for the file!
I have an issue, when I try to flash it, I get an "Invalid BIOS Image" Error.
I am very sure I have done everything correctly.
I have managed to flash the modified BIOS onto my motherboard using the efiflasher.
While it was successful, the modified BIOS still doesn’t allow me to push the Core Clock Ratio higher than 42, which is the speed of the Turbo Clock that my CPU has.
I was looking for a way to push that higher, and essentially “unlocking” the board just like a Z chipset.
Is there a way to do that?
Good evening, were you able to overclock?