hey everyone,
I’m looking to unlock the " Aperture size" bios option for my m9e .
I did searches around the forum and found a guide on another thread but I couldn’t follow the steps exactly so I created this thread.
here is the bios file (the bios is modded to run cofeelake hence its not the one from the asus website):
M9E moded
@crashpb
Hi~please try this mod ,after successful flash then go into to path Advanced => System Agent (SA) Configuration=> Graphics Configuration and check the result.
hey,
thanks for the file it worked perfectly.
however there were few side effect of setting aperture size to 4096MB for anyone wondering:
I would lose image during the initial post process however the OS loads successfully .(no access to bios settings (visually at least) and the VGA-Error LED is always one)
The post process takes a bit longer but eventually it boots the OS (and I do have display in the OS ).
note to anyone else planning to use this file; remember to change board UUID and MAC address to your own so you don’t lose your UUID and MAC .