Hello MeatWar !
You took the trouble to make the Bios for me with: IRST 13.2.0.2134.
I also found a Post that @Fernando (From what I understand) also Agrees.
USB Bios Flash Back Not working properly at all.
But I have a reservation on file, from Original Asus Bios-Chip,
with all the additional elements needed, using the Programmer.
And I can Put them, in your Bios too,
with “FD44Editor . exe” from “github . com”.
Then I convert it to Rom or Bin, and Put it in a Bios-Chip with the Programmer.
Thank you very much for the help, which you offered me immediately.
(It’s not the first time, I’ve learned a lot from your short and meaningful posts).
[My posts: are : Lots of words … and from juice → Chaos.]
But the evolution of the human species is based on Greed! (Not in Ingratitude!).
And I’m also afraid of it, because even in FW change with instructions and
software from the same (native)
the trial of the company, the device may be damaged.
(It’s happened to me before).
The … SataDriver_12_7_1036
It hasn’t changed …
This is how bios that I made in the past with UBU have remained.
But not even Asus (on 4805) Changed it to : SataDriver_12.7.0.1936.
But I know well … what works perfectly.
If I change it
User Interface
then it changes
and
the Compressed … but,
I haven’t put it in the Chip-Bios, because I don’t know:
Will it work correctly, or not at all.
As I have written before I had put in the P.C. the Bios of Lost_N_Bios.
Everyone liked it, but it doesn’t fit on my P.C.
I am attaching it to you…
- If you want to take a look at the differences:
M. E. FW 8.1.70.1590 from @Lost_N_Bios
With the (Vs)
M.E. FW 8.1.70.1590 from WinRaid
Intel (Converged Security) Management Engine: Drivers, Firmware and Tools (2-15)
Asus X79-DELUXE-4805-NVME-Bifurcation-Mod-UPDALL.rar (5.5 MB)
ME 8 1.5MB v8.1.70.1590.rar (969.0 KB)
- File GUID: 43A0B8C4-1160-1702-A46D-DDC03E52CB5C
SataDriver_13_5_2164
It has also been in the Compressed section
and with: extract body uncompressed …
it gives: S.a.t.a.D.r.i.v.e.r..1.3..5._.2.1.6.4…
. . . . . . . . . . . . . .
Some of my own Tests:
With MMTooL and the X79DLX_ubu.CAP
I extracted from the SataDrive: the two Files, *.FFS
in As-is (Compressed)
and UnCompressed.
And After RepLace.
Here I RepLace The UnCompressed file with MMTooL In: X79DLX_ubu.CAP
And saveas : As a: X79DLX_ubu_TEST-EFi_UnCompr.rom
. . . .
Here I did in : X79DLX_ubu_TEST-EFi_UnCompr.rom
Yet another one : RepLace : the As-is (Compressed)
And saveas : As a : X79DLX_ubu_RPL_UnCompr+As-is.rom
But the result is a hole in the water.
And most probably a damaged one Mod Mod … Bios.!
. . . . . . . . . . . . . . . . .
Here I did “Replace” The RaidDriver.ffs with Header.From WinRaid.!
And saveas : As a : X79DLX_ubu_RPL_FFS-Header.rom
RaidDriver.ffs From WinRaid.
RaidDriver_ffs_With-Header.rar (77.4 KB)
And saveas : As a : X79DLX_ubu_RPL_FFS-Header.rom
But the GUID had been changed.
And the Compressed Section has disappeared.
But the User Interface … …
… It changed itself to the correct version of SataDriver.
’ ’ ’ ’
It might be necessary a RaidDriver.ffs With Header
that is appropriate for her: Asus X79-DELUXE,
and knowledge that I do not have.
Maybe someone can help me…
for us to see.
Best regards to all.
Dioskouridis.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[Question.]
… or …
[Request] Update of the Intel RST EFI RaidDriver Module
Could someone write to me,
how do i change the :
EFI Intel RST RAID Driver - 12.7.0.1936
with the:
EFI Intel RST VMD Driver - 13.2.0.2134
Only by using MMTool.
Without using UBU or UEFiTooL.
The : EFI Intel RST RAID Driver - 12.7.0.1936
It’s about Bios: ASUS X79-DeLuXe 4805.
https://dlcdnets.asus.com/pub/ASUS/mb/LGA2011/X79-Deluxe/X79-DELUXE-ASUS-4805.zip?model=X79-DELUXE 1
Regards.
Dioskouridis.