Stuck at post code 95 after bios flash..

[davidm71]

Hi,

I modded my Asus P8Z68 bios to a newer intel raid rom version using mmtool. Just had one hiccup. After flashing from within the Asus bios utility and successful flash message the system rebooted and stalled on post code 95. Fearing a bad flash I pressed the power button and was able to continue no worse for wear. I tried this twice after reverifying my modules were placed correctly using hex editor. Should note i took the original bios file through a backup of the bios and then modded it. Never happened like this before. Anyone know what’s post code 95 all about?

Thank you.

[ErfanDL]

@davidm71

Hi,

I modded my Asus P8Z68 bios to a newer intel raid rom version using mmtool. Just had one hiccup. After flashing from within the Asus bios utility and successful flash message the system rebooted and stalled on post code 95. Fearing a bad flash I pressed the power button and was able to continue no worse for wear. I tried this twice after reverifying my modules were placed correctly using hex editor. Should note i took the original bios file through a backup of the bios and then modded it. Never happened like this before. Anyone know what’s post code 95 all about?

Thank you.

try modding your bios with UBU: [Tool] "UEFI BIOS Updater" (UBU)

[Fernando]

@ davidm71:

Since I used an ASUS P8Z68-V mainboard for a long time, I have flashed very often a modded BIOS into the BIOS chip of the board.
I always modded the latest original BIOS version, which was offered by ASUS, and flashed the modded BIOS by using the EZ tool - without getting any problem while or after flashing the modded BIOS.